CRD4525-Q1 Cirrus Logic Inc, CRD4525-Q1 Datasheet - Page 85

• Manufacturer Part Number: CRD4525-Q1
• Description: REFERENCE BOARD FOR CS4525 PWM
• Manufacturer: Cirrus Logic Inc
• Series: Popguard®r

Specifications of CRD4525-Q1

• Amplifier Type: Class D
• Output Type: 2-Channel (Stereo)
• Max Output Power X Channels @ Load: 15W x 2 @ 8 Ohm
• Voltage - Supply: 12 V ~ 18 V
• Operating Temperature: 0°C ~ 70°C
• Board Type: Fully Populated
• Utilized Ic / Part: CS4525
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 598-1586

DS726PP3
9.15.6 Sub Channel Mute (MuteSub)
9.16
9.16.1 Maximum Threshold (Max[2:0])
9.16.2 Minimum Threshold (Min[2:0])
Max2
7
Limiter Configuration 1 (Address 5Ch)
function is affected, similar to attenuation changes, by the soft and zero cross bits (SZCMode[1:0]). See
“Volume and Muting Control” on page 36
Default = 0
Function:
The sub channel’s power PWM, logic-level PWM, and auxiliary serial data outputs will enter a mute state
when enabled. The muting function is affected, similar to attenuation changes, by the soft and zero cross
bits (SZCMode[1:0]). See
Default = 000
Function:
Sets the maximum level, below full scale, at which to limit and attenuate the output signal at the limiter
attack rate.
Default = 000
Function:
Sets a minimum level below full scale at which the limiter will begin to release its applied attenuation.
MuteChX Setting
MuteSub Setting
Max[2:0] Setting
Min[2:0] Setting
0 ..........................................Channel X PWM outputs un-muted.
1 ..........................................Channel X PWM outputs muted.
0 ..........................................Sub channel PWM outputs un-muted.
1 ..........................................Sub channel PWM outputs muted.
000 ......................................0.0 dB
001 ......................................-3.0 dB
010 ......................................-6.0 dB
011.......................................-9.0 dB
100 ......................................-12.0 dB
101 ......................................-18.0 dB
110.......................................-24.0 dB
111 .......................................-30.0 dB
000 ......................................0.0 dB
001 ......................................-3.0 dB
010 ......................................-6.0 dB
011.......................................-9.0 dB
100 ......................................-12.0 dB
101 ......................................-18.0 dB
110.......................................-24.0 dB
111 .......................................-30.0 dB
Max1
6
Maximum Threshold Setting
Channel X PWM Mute State
Sub Channel PWM Mute State
Max0
Minimum Threshold Setting
5
“Volume and Muting Control” on page 36
Min2
4
for more information.
Min1
3
Min0
for more information.
2
LimitAll
1
CS4525
EnLimiter
0
85