EZ80F920200ZCO Zilog, EZ80F920200ZCO Datasheet - Page 30

• Manufacturer Part Number: EZ80F920200ZCO
• Description: KIT DEV FOR EZ80F92 W/C-COMPILER
• Manufacturer: Zilog
• Series: eZ80 Acclaim!®r
• Type: MCUr

Specifications of EZ80F920200ZCO

• Contents: 2 Primary Boards, Hardware, Software and Documentation
• For Use With/related Products: eZ80F92
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3162; EZ80F920200ZCO

20
Operational Description
eZ80F92 Development Kit
User Manual
Note:
Application Module Interface
These three inputs are:
•
•
•
These three signals are described below.
Disable Flash*
When active Low, the DIS_Flash input signal disables the Flash chip on
the eZ80F92 Flash Module.
Flash Write Enable*
When active Low, the FlashWE input signal enables Write operations on
the Flash boot block of the eZ80F92 Flash Module.
Disable IrDA
When the DIS_IrDA input signal is pulled Low, the IrDA transceiver,
located on the eZ80F92 Flash Module, is disabled. As a result, UART0
can be used with the RS232 or the RS485 interfaces on the eZ80
opment Platform.
*These inputs are only used if external Flash is present on the eZ80F92
Flash Module (as shipped from the factory, external Flash is not
installed).
An Application Module Interface is provided to allow the user to add an
application-specific module to the eZ80
ZiLOG’s Thermostat Application Module (not provided in the kit) is an
example application-specific module that demonstrates an HVAC control
system. Implementing an application module with the Application Mod-
ule Interface requires that the eZ80F92 Flash Module also be mounted on
Disable Flash (DIS_Flash)*
Flash Write Enable (FlashWE)*
Disable IrDA (DIS_IrDA)
PRELIMINARY
®
Development Platform.
UM013904-0203
®
Devel-