EZ80F920200ZCO Zilog, EZ80F920200ZCO Datasheet - Page 44

• Manufacturer Part Number: EZ80F920200ZCO
• Description: KIT DEV FOR EZ80F92 W/C-COMPILER
• Manufacturer: Zilog
• Series: eZ80 Acclaim!®r
• Type: MCUr

Specifications of EZ80F920200ZCO

• Contents: 2 Primary Boards, Hardware, Software and Documentation
• For Use With/related Products: eZ80F92
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3162; EZ80F920200ZCO

34
Operational Description
Shunt
Status
In
Out
eZ80F92 Development Kit
User Manual
Jumpers
Function
IrDA interface disabled UART0 is configured to work with the RS232 or the
IrDA interface enabled The IrDA and UART0 interfaces on the eZ80F92 Flash
PB1
The PB1 push button switch, SW2, is connected to bit 1 of GPIO Port B.
This switch can be used as the port input if required by the user.
PB2
The PB2 push button switch, SW3, is connected to bit 2 of GPIO Port B.
This switch can be used as the port input if required by the user.
RESET
The Reset push button switch, SW4, resets the eZ80
Development Platform.
The eZ80
used to enable or disable functionality on the platform, enable or disable
optional features, or to provide protection from inadvertent use.
Jumper J2
The J2 jumper connection enables/disables IrDA transceiver functional-
ity. When the shunt is placed, IrDA communication is disabled. See
Table 13.
®
Development Platform provides a number of jumpers that are
Table 13. J2—DIS_IrDA
Affected Device
RS485 interfaces.
Module perform their functions.
PRELIMINARY
®
CPU and the eZ80
UM013904-0203
®