EZ80F920200ZCO Zilog, EZ80F920200ZCO Datasheet - Page 61

• Manufacturer Part Number: EZ80F920200ZCO
• Description: KIT DEV FOR EZ80F92 W/C-COMPILER
• Manufacturer: Zilog
• Series: eZ80 Acclaim!®r
• Type: MCUr

Specifications of EZ80F920200ZCO

• Contents: 2 Primary Boards, Hardware, Software and Documentation
• For Use With/related Products: eZ80F92
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3162; EZ80F920200ZCO

DC Characteristics
Flash Loader Utility
Mounting the Module
UM013904-0203
As different combinations of application modules are loaded onto the
eZ80
Table 24
different module combinations.
A 0.1-Farad capacitor is provided on the eZ80F92 Flash Module as a
short-term battery backup for the RTC (see the
page 59). The part number of the capacitor made by Panasonic is
EECS0HDV. The capacitor is connected to RTC_VDD to provide power
to the RTC when main power to the chip is removed; it is also connected
to the 3.3V supply to the chip for recharging. The RTC can operate down
to 3.0V; it requires 10µA of current. The (keep alive) time this capacitor
can supply power to the RTC, from 3.3V to 3.0V, is approximately 3000
seconds, or 50 minutes.
The Flash Loader utility allows the user a convenient way to program on-
chip Flash memory. Please refer to the
User Guide
When mounting the eZ80F92 Flash Module onto the eZ80
Platform, check its orientation to the platform to ensure a correct fit. Pin 1
of JP1 on the eZ80
on the eZ80
Module must align with pin 1 of JP2 on the eZ80
form, etc.
®
Development Platform, current requirements change. Please see
on page 41 to reference current consumption values for these
®
(PUG0016) for more details.
Development Platform; Pin 1 of JP2 on the eZ80F92 Flash
PRELIMINARY
®
Development Platform must align with pin 1 of JP1
External Flash Loader Product
eZ80F92 Development Kit
Schematic Diagrams
®
Development Plat-
DC Characteristics
User Manual
®
Development
on
51