HS7729KCI01H Renesas Electronics America, HS7729KCI01H Datasheet - Page 208

• Manufacturer Part Number: HS7729KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7729KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• For Use With/related Products: SH7729
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.2.25
Description:
Sets the address translation (VP_MAP) table in the emulator.
Format:
vs <lsaddress> <leaddress> <paddress>
Table 5.26 VPMAP_SET Command Parameters
Parameter
<lsaddress>
<leaddress>
<paddress>
Note: The virtual address range to be newly set cannot overlap a virtual address that has already
Example:
To set the virtual address range H'4000 to H'4FFF to be translated into the physical address range
H'400000 to H'400FFF:
Related Items:
VC, VD, and VE commands
Note: This command is not supported in a device in which the MMU is not built-in.
Rev. 2.0, 01/01, page 182 of 216
been set. Clear the previous set range when making a new setting.
> vs H'4000 H'4fff H'400000 (RET)
VPMAP_SET: VS
Type
Numerical value
Numerical value
Numerical value
Description
Specifies the virtual start address to be set in the
VP_MAP table in the page size units supported by
the MMU. Setting a physical fixed area or an internal
I/O area as a virtual address will result in an error.
Specifies the virtual end address to be set in the
VP_MAP table in the page size units supported by
the MMU. Setting a physical fixed area or an internal
I/O area as a virtual address will result in an error.
Specifies the physical start address to be set in the
VP_MAP table.