HS7729KCI01H Renesas Electronics America, HS7729KCI01H Datasheet - Page 39

• Manufacturer Part Number: HS7729KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7729KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• For Use With/related Products: SH7729
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Notes: 1. To connect the signals output from the Hitachi-UDI port connector, refer to the
Figure 2.4 Connecting the User System Interface Cable to the User System when the 14-pin
2. To remove the user system interface cable from the user system, pull the tab on
3. The range of frequencies that the Hitachi-UDI operates at is different according
4. Connect the Hitachi-UDI signals from the Hitachi-UDI port connector directly to
5. When developing user systems, do not connect the TDI and TDO signals of the
GND line
device pin alignment.
the connector upward.
to the devices used. For details, refer to section 6.5.4, Notes on Using the JTAG
Clock (TCK) and AUD Clock (AUDCK).
the device.
device to the boundary scan loop, or separate them by using a switch (figure 2.5).
User system GND
connection
Straight Type Connector is Used
User system interface cable
Pin 8
Pin 1
Rev. 2.0, 01/01, page 13 of 216
Hitachi-UDI port
connector
User system
Tab