HS7729KCI01H Renesas Electronics America, HS7729KCI01H Datasheet - Page 27

• Manufacturer Part Number: HS7729KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7729KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• For Use With/related Products: SH7729
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

The E10A emulator (hereafter referred to as the emulator) is a software and hardware development
support tool for application systems using the microprocessor developed by Hitachi, Ltd.
The PCMCIA card emulator or PCI card emulator (hereafter referred to as the card emulator),
which is the main unit of the emulator, is connected, through the Hitachi-UDI (user debug
interface) port*, to the user system. The user system can be debugged under the conditions similar
to the actual application conditions. The emulator enables debugging anywhere indoors or out.
The host computer for controlling the emulator must be an IBM PC compatible machine with a
PCMCIA type II or PCI slot.
Figures 1.1 and 1.2 show the system configuration using the emulator.
Note: The Hitachi-UDI is an interface compatible with the Joint Test Action Group
Figure 1.1 System Configuration with the Emulator (PCMCIA Card Emulator Used)
(JTAG) specifications.
Host computer (PC with PCMCIA TYPE II slot)
Insert into the PCMCIA TYPE II slot
Connect to the Hitachi-UDI port connector
Section 1 Overview
Insert
PC Card Emulator
H-UDI Micro Computer
PCMCIA card emulator
Development System
HITACHI
Card
PC
User system interface cable
User system
Rev. 2.0, 01/01, page 1 of 216
SHxxxx