M68ICS08KX Freescale Semiconductor, M68ICS08KX Datasheet - Page 22

• Manufacturer Part Number: M68ICS08KX
• Description: SIM PROGRAM FOR 68HC908KX8/KX2
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS08KX

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC908KX8/KX2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Preparation and Installation
2.2.3.2 SOIC-type MCU
User’s Manual
22
CAUTION:
NOTE:
NOTE:
The top (label side) of the MCU package must be visible when looking at the
component side of the board.
Installation of a SOIC type MCU requires the use of the SOIC-to-DIP adapter
identified in Table 1-1 of this manual.
The SOIC-to-DIP adapter may be confusing to install. It must be placed into the
DIP socket, XU1, with the hinged side of the SOIC shell aligned to the bottom
of the KXICS board. This positioning will place the SOIC-type MCU socket pin
1 in the upper left corner of the SOIC socket.
3. Place the pin tension arm of the KXICS DIP socket XU1 in the down
1. Place the pin tension arm of the KXICS DIP socket XU1 (Figure 2-1)
2. Install the SOIC-to-DIP adapter into the DIP socket XU1 (Figure
3. Place the pin tension arm of the KXICS DIP socket XU1 in the down
4. Open the hinged access door on the SOIC shell.
5. Install the SOIC-type MCU into the SOIC socket of the adapter. Be
6. Close and secure the hinged access door on the SOIC shell.
position to secure the pins of the MCU to the socket.
in the up position.
2-1). Be sure that the pin 1 orientation of the adapter aligns with the
pin 1 location on the DIP socket (upper left pin of the DIP socket).
position to secure the pins of the adapter to the socket.
sure that the pin 1 orientation of the silkscreened dot on the MCU
aligns with the pin 1 location on the SOIC socket (upper left pin of
the socket).
Preparation and Installation
M68ICS08KX In-Circuit Simulator
MOTOROLA