M68ICS08KX Freescale Semiconductor, M68ICS08KX Datasheet - Page 58

• Manufacturer Part Number: M68ICS08KX
• Description: SIM PROGRAM FOR 68HC908KX8/KX2
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS08KX

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC908KX8/KX2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

B.1 Introduction
M68ICS08KX In-Circuit Simulator
MOTOROLA
User’s Manual — M68ICS08KX In-Circuit Simulator
ESD CAUTION:
Appendix B. Quick Start Hardware Configuration Guide
This quick start guide explains the:
There are four methods for configuring the KXICS: standalone, simulation,
evaluation, and programming.
Ordinary amounts of static electricity from clothing or the work environment
can damage or degrade electronic devices and equipment. For example, the
electronic components installed on the printed circuit board are extremely
sensitive to electrostatic discharge (ESD). Wear a grounding wrist strap
•
•
•
•
•
•
•
Configuration of the M68ICS08KX in-circuit simulator (KXICS) board
Installation of the hardware
Connection of the board to a target system
Standalone — ICS08KXZ.exe is running on the host computer (the
KXICS is not connected). Emulation of the MC68HC908KX8 MCU
CPU, registers, and I/O ports is within the host computer environment.
Simulation — Host computer is connected to the KXICS via the RS-232
cable, and the ICS08KXZ.exe is running on the host computer. This
provides access to the MC68HC908KX8 MCU, internal registers, and
I/O ports.
Evaluation — Host computer is connected to the KXICS, and the KXICS
is connected to the target system via the flex cable. This method provides
limited real-time evaluation of the MCU and debugging user developed
hardware and software.
Programming — Host computer is connected to the KXICS, and the
KXICS is connected to the target system via the MON08 cable. Use the
PROG08SZ.exe to program the MCU FLASH module. In the
programming mode there is limited evaluation.
Quick Start Hardware Configuration Guide
User’s Manual
53