M68ICS08KX Freescale Semiconductor, M68ICS08KX Datasheet - Page 32

• Manufacturer Part Number: M68ICS08KX
• Description: SIM PROGRAM FOR 68HC908KX8/KX2
• Manufacturer: Freescale Semiconductor
• Type: Simulator/Programmerr

Specifications of M68ICS08KX

• Contents: Programmer, Power Supply, Assembler/Simulator/Debugger, Cable, Software and Documentation
• For Use With/related Products: 68HC908KX8/KX2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Support Information
3.3 Level Translation
3.4 KXICS Theory of Operation
3.4.1 Power Supply
User’s Manual
32
CAUTION:
NOTE:
NOTE:
Depending on the connection, the MCU is used in one of three operating modes:
For the following discussion on the theory of operation of the KXICS, refer to
the schematic diagrams in Paragraph 3.6, Figures 3-1 to 3-6 of this section.
The KXICS has an operation voltage range of +2.0 to +5.0 volts while the host
development system interface is an RS-232 (COM) port. U12 on the ICS
converts 5-volt logic signals to RS-232 levels. ICS U10–U13 translate 5-volt
logic levels to the MCU operating voltage (2.0–3.3 volts).
For the following discussion on the theory of operation of the KXICS, refer to
the schematic diagrams in Paragraph 3.7.
Power input, J2, to the KXICS is via a standard DC power receptacle with a
2.5mm center pin. Input voltage is 5Vdc provided by a plug in the DC power
adapter.
The power is fused to prevent catastrophic failure by fuse F1 (5x20mm or 3AG
fuse).
Always use a fuse of the proper current and voltage rating. Failure to do so can
result in serious equipment damage
In addition, the input line has a Transient Voltage Suppression (TVS) diode to
stop high voltage transients, including ESD events, from damaging the board.
A green LED is provided to indicate that 5VDC is being provided to the board,
with the ON/Off switch in the ON position. Power, however, is not available to
•
•
•
In the KXICS socket for programming and simple simulation
In the KXICS socket and connected to the target for emulation
On the target for MON08 debug operation
Support Information
M68ICS08KX In-Circuit Simulator
MOTOROLA