MPC564EVB Freescale Semiconductor, MPC564EVB Datasheet - Page 819

• Manufacturer Part Number: MPC564EVB
• Description: KIT EVAL FOR MPC561/562/563/564
• Manufacturer: Freescale Semiconductor
• Type: Microcontrollerr

Specifications of MPC564EVB

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MPC56x
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet
• For Use With/related Products: MPC561, 562, 563, 564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Freescale Semiconductor
1
(a) If ENRX is disabled, no data will shift into the PPM.
(b) If ENRX is asserted while ENTX=1, the first data bit received will be the data that is transmitted from the PPM, and
2
(a) If ENTX is disabled, no data will shift out of the PPM and the PPM output signals, PPM_TX0 and PPM_TX1 will be
(b) If ENTX is asserted while ENRX = 1, the first data bits transmitted out of the PPM will be the data that was received
Enable RX.
not RX0. See
Enable TX.
high.
into the PPM. See
11:15
Bits
10
Figure
Name
CM
—
Figure
18-10. To receive the first data frame correctly, ENRX and ENTX should be set simultaneously.
Continuous Mode.
0 Non-continuous mode (default). Transmit and/or receive one data frame when STR = 1.
(STR will be automatically cleared by the PPM after the transfer of one data frame.)
1 Data will continuously be transmitted and/or received as long as Transmit and Receive
are enabled.
Refer to
Note: Ensure PPMPCR[STR]=0 when setting PPMPCR[CM]=1
Reserved
18-11. To transmit the first data frame correctly, set ENTX and ENRX simultaneously.
Table 18-3. PPMPCR Bit Descriptions (continued)
MPC561/MPC563 Reference Manual, Rev. 1.2
Table 18-5
SAMP[0:2]
100 – 111
Table 18-4. SAMP[0:2] Bit Settings
000
001
010
011
for more information.
Description
Every 16 TCLK
Every 2 TCLK
Every 4 TCLK
Every 8 TCLK
Sample Rate
Every TCLK
Peripheral Pin Multiplexing (PPM) Module
18-13