MPC566EVB Freescale Semiconductor, MPC566EVB Datasheet - Page 11

• Manufacturer Part Number: MPC566EVB
• Description: KIT EVALUATION FOR MPC565/566
• Manufacturer: Freescale Semiconductor

Specifications of MPC566EVB

• Processor To Be Evaluated: MPC56x
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Freescale Semiconductor, Inc.
Chapter 1
MPC566 EVB Board
The MPC566EVB is an MPC566-based evaluation board that can be used for the development and
1
test of microcontroller systems
(see Figure 1-1). The MPC566 is a member of the Motorola
MPC500 RISC microcontroller family. It is a 32-bit processor with a 32-bit internal address bus
and 32 lines of data.
The evaluation board is a development and test platform for software and hardware for the
1
MPC566
. The system provides for development of target applications for the similar MPC561,
MPC562, or MPC563 microcontrollers also. It can be used by software and hardware developers
to test programs, tools, or circuits without having to develop a complete microcontroller system
1
themselves. All special features of the MPC566
are supported.
The heart of the evaluation board is the MPC566. The MPC566EVB has 1Mbyte (256K x 32)
external SRAM for development or application memory, 2Mbyte (512K x 32) external Flash
memory, and numerous hardware expansion possibilities. The MPC566EVB board also provides
an Ethernet interface (10/100BaseT), TouCAN, and RS232 interface in addition to the built-in I/O
1
functions of the MPC566
device for programming and evaluating the attributes of the micropro-
cessor. To support development and test, the evaluation board can be connected to debuggers and
emulators produced by different manufacturers.
The MPC566EVB provides for low cost software testing with the use of a ROM resident debug
monitor, dBUG, programmed into the external Flash device. Operation allows the user to load
code in the on-board RAM, execute applications, set breakpoints, and display or modify registers
or memory. After software is operational, the user may program the MPC566 Internal Flash
EEPROM or the on-board FLASH memory for dedicated operation of new software application.
No additional hardware or software is required for basic operation. For high level debug, exten-
sive third-party tools are available for the MPC500 series. The Nexus and BDM debug ports are
available to connect the tool sets.
Specifications
Clock: 56 MHz Maximum, 4Mhz reference
Operating temperature: 0°C to +70°C
Power requirement: 6 – 26V DC @ 300 ma Typical
Power output: 5.8V @ 1.5A output with 5V, 3.3V, and 2.6V regulated supplies
Board Size: 7.00 x 7.60 inches, 8 layers
1
5
6
The MPC56
6
EVB can be used to emulate the MPC53
and MPC53
. See Appendix A and MPC566 Electrical
Spec for limitations.
Chapter 1. MPC566 EVB Board
1-1
For More Information On This Product,
Go to: www.freescale.com