FS-935 Digi International, FS-935 Datasheet - Page 26

• Manufacturer Part Number: FS-935
• Description: JTAG-BOOSTER FOR IDT64145 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-935

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: IDT64145 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The following options are valid for most functions:
/DRIVER=x
A driver for the interface to the JTAG-BOOSTER on the parallel port may be
specified. /DRIVER=1 selects the fastest available driver, /DRIVER=4 selects
the slowest one. Use a slower driver if there are problems with JTAG-
BOOSTER.
Default:
/INI=file
An initialization file may be specified. By default the current directory is
searched for the file JTAG145.INI. If this file is not found and no initialization file
is specified in the command line, default initialization values are used (see also
chapter 1.6 “Initialization file JTAG145.INI”).
Default:
/LATTICE
For demonstration purposes this software works with the Lattice ispLSI-Adapter,
too. With the option /LATTICE you can simulate the speed achievable with the
simple ispLSI-Adapter.
/LPT1 /LPT2 /LPT3
A printer port may be specified where the JTAG-Booster resides.
Default:
/LPT-BASE
The physical I/O-Address of printer port may be specified instead of the logical
printer name.
/OUT=file_or_device
All screen outputs are redirected to the specified file or device. Note that you
can't redirect to the same parallel port where the JTAG-Booster resides.
Default:
/PAUSE
With the option /PAUSE you can force the program to stop after each screen.
Please do not use this option if you redirect the output to a file.
Abbreviation:
26
with x = 1,2,3,4
/DRIVER=3
/INI=JTAG145.INI
/LPT1
/OUT=CON
/P
JTAG145a.doc