FS-935 Digi International, FS-935 Datasheet - Page 29

• Manufacturer Part Number: FS-935
• Description: JTAG-BOOSTER FOR IDT64145 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-935

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: IDT64145 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

/TOP
If the option /TOP is used the option /OFFSET= specifies the address where the
programming ends (plus one) instead of the starting address. This option is very
important for Intel CPU architectures, because target execution always starts at
the top of the address space.
/FILE-OFFSET=hhhhhh
If FILE-OFFSET is specified, the first hhhhhh bytes of the file are skipped and
not programmed to target.
Default:
Abbreviation:
/LENGTH=hhhhhh
The number of programmed bytes may be limited to LENGTH. If no LENGTH is
specified the whole file is programmed.
Default:
Abbreviation:
/VERIFY
If this option is specified, the result is verified on a cell by cell (cell=8bit or 16bit)
basis instead of a complete verify after programming. If you want both a cell by
cell verify and a complete verify after programming, please use a additional
command line with the verify function. See chapter 2.3 “Verify a Flash Device
with file”.
/NODUMP
In case of a verify error the contents of the flash memory is written to a file with
the extension .DMP. With /NODUMP you can suppress this feature.
/ERASEALL
Erase the whole flash device. If this option isn't set, only those blocks are
erased where new data should be written to.
/NOERASE
This option prevents the flash device from being erased.
JTAG145a.doc
/FILE-OFFSET=0
/FO=
/LENGTH=4000000 (64 MByte)
/L=
29