FS-935 Digi International, FS-935 Datasheet - Page 37

• Manufacturer Part Number: FS-935
• Description: JTAG-BOOSTER FOR IDT64145 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-935

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: IDT64145 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

JTAG-Booster for IDT 64145
/LENGTH=hhhhhh
The number of programmed bytes may be limited to LENGTH. If no LENGTH is
specified the whole file is programmed.
Abbreviation:
/L=
/NODUMP
In case of a verify error the contents of the I²C-Device is written to a file with the
extension .DMP. With option /NODUMP you can suppress this feature.
/I2CCLK=pin_name
Specifies the CPU pin used for serial clock output.
/I2CDAT=pin_name
Specifies the CPU pin used for serial data input and output. Pin_name must
specify a bidirectional pin otherwise an error message occurs. Instead of one
bidirectional pin one pin for serial data input and one for serial data output may
be used. See option /I2CDATO= and /I2CDATI= .
/I2CDATO=pin_name
Specifies the CPU pin used for serial data output. Pin_name must specify a
output pin otherwise an error message occurs.
/I2CDATI=pin_name
Specifies the CPU pin used for serial data input. Pin_name must specify a input
pin otherwise an error message occurs.
Example:
JTAG145 /PI2C EEPROM.CFG /I2CCLK=PIO10 /I2CDAT=PIO11
This example loads the file EEPROM.CFG to a serial EEPROM connected to
the pins PIO10 and PIO11 of the IDT RC64145
JTAG145a.doc
37