PIC24FJ64GA006-I/PT Microchip Technology, PIC24FJ64GA006-I/PT Datasheet - Page 171

• Manufacturer Part Number: PIC24FJ64GA006-I/PT
• Description: IC PIC MCU FLASH 32KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ64GA006-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240011, DV164033, MA240013, AC164127, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Controller Family/series: PIC24
• No. Of I/o's: 53
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM240011 - KIT STARTER MPLAB FOR PIC24F MCUDV164033 - KIT START EXPLORER 16 MPLAB ICD2MA160011 - DAUGHTER BOARD PICDEM LCD 16F91XDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 19-1:
19.4
19.4.1
If Sleep mode is entered while the module is operating,
the module will be suspended in its current state until
clock execution resumes.
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-14
bit 13
bit 12-8
bit 7
bit 6
bit 5
bit 4
bit 3-0
CRCFUL
U-0
R-0
—
Operation in Power Save Modes
SLEEP MODE
Unimplemented: Read as ‘0’
CSIDL: CRC Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
VWORD4:VWORD0: Pointer Value bits
Indicates the number of valid words in the FIFO. Has a maximum value of 8 when PLEN3:PLEN0 > 7,
or 16 when PLEN3:PLEN0
CRCFUL: FIFO Full bit
1 = FIFO is full
0 = FIFO is not full
CRCMPT: FIFO Empty bit
1 = FIFO is empty
0 = FIFO is not empty
Unimplemented: Read as ‘0’
CRCGO: Start CRC bit
1 = Start CRC serial shifter
0 = CRC serial shifter turned off
PLEN3:PLEN0: Polynomial Length bits
Denotes the length of the polynomial to be generated minus 1.
CRCMPT
U-0
R-1
—
CRCCON: CRC CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
R/W-0
CSIDL
U-0
—
≤
7.
VWORD4
CRCGO
PIC24FJ128GA010 FAMILY
R/W-0
R-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
VWORD3
PLEN3
R/W-0
R-0
19.4.2
To continue full module operation in Idle mode, the
CSIDL bit must be cleared prior to entry into the mode.
If CSIDL = 1, the module will behave the same way as
it does in Sleep mode; pending interrupt events will be
passed on, even though the module clocks are not
available.
VWORD2
IDLE MODE
PLEN2
R/W-0
R-0
x = Bit is unknown
VWORD1
PLEN1
R/W-0
R-0
DS39747E-page 171
VWORD0
PLEN0
R/W-0
R-0
bit 8
bit 0