MB95F118JWPMC-GE1 Fujitsu Semiconductor America Inc, MB95F118JWPMC-GE1 Datasheet - Page 5

• Manufacturer Part Number: MB95F118JWPMC-GE1
• Description: IC MCU 60K FLASH 2KB RAM 52LQFP
• Manufacturer: Fujitsu Semiconductor America Inc
• Series: F²MC MB95110Mr

Specifications of MB95F118JWPMC-GE1

• Core Processor: F²MC-8FX
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SIO, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 8x8/10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: 865-1071

(Continued)
*1 : For ROM capacitance and RAM capacitance, refer to “■ MEMORY LINEUP”.
*2 : When the MASK ROM is ordered, please select yes/no for the clock mode, low voltage detection, clock
*3 : Specify clock mode when ordering MASK ROM.
Note : Part number of the evaluation products in MB95110M series is MB95FV100D-103. When using it, the MCU
Flash memory
Standby mode
Parameter
LIN-UART
8/10-bit A/D
converter
(8 channels)
8/16-bit
compound
timer
(2 channels)
16-bit PPG
8/16-bit PPG
(2 channels)
Watch counter
(for dual clock
product)
Watch
prescaler
(for dual clock
product)
External
interrupt
(8 channels)
supervisor and reset output.
(1 channel)
(1 channel)
(1 channel)
Part number
board (MB2146-303A) is required.
Dedicated reload timer allowing a wide range of communication speeds to be set.
Full duplex double buffer.
Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer
capable.
LIN functions available as the LIN master or LIN slave.
8-bit or 10-bit resolution can be selected.
Each channel of the timer can be used as “8-bit timer × 2 channels” or
“16-bit timer × 1 channel”.
Built-in timer function, PWC function, PWM function, capture function, and square waveform
output
Count clock : 7 internal clocks and external clock can be selected
PWM mode or one-shot mode can be selected.
Counter operating clock : 8 selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as
Counter operating clock : Eight selectable clock sources
Count clock : 4 selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63 (Capable of counting for 1minute when
selecting clock source 1 second and setting counter value to 60).
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
Interrupt by edge detection (rising, falling, or both edges can be selected.)
Can be used to recover from standby modes.
Supports automatic programming, Embedded Algorithm
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Data retention time: 20 years
Erase can be performed on each block
Block protection with external programming voltage
Dual operation Flash memory
Flash Security Feature for protecting the content of the Flash
Sleep, stop, watch (for dual clock product) , and time-base timer
MB95117M
MB95F114MS/
MB95F116MS/
MB95F118MS
MB95F114NS/
MB95F116NS/
MB95F118NS
MB95F114MW/
MB95F116MW/
MB95F118MW/
“
8-bit PPG
×
2 channels
MB95F114NW/
MB95F116NW/
MB95F118NW
MB95110M Series
”
or
MB95F114JS/
MB95F116JS/
MB95F118JS
“
16-bit PPG
×
MB95F114JW/
MB95F116JW/
MB95F118JW
1 channel
”
.
5