MB95F118JWPMC-GE1 Fujitsu Semiconductor America Inc, MB95F118JWPMC-GE1 Datasheet - Page 7

• Manufacturer Part Number: MB95F118JWPMC-GE1
• Description: IC MCU 60K FLASH 2KB RAM 52LQFP
• Manufacturer: Fujitsu Semiconductor America Inc
• Series: F²MC MB95110Mr

Specifications of MB95F118JWPMC-GE1

• Core Processor: F²MC-8FX
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SIO, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 8x8/10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: 865-1071

■ DIFFERENCES AMONG PRODUCTS AND NOTES ON SELECTING PRODUCTS
• Notes on Using Evaluation Products
• Difference of Memory Spaces
• Current Consumption
• Package
• Operating Voltage
• Difference between RST and MOD Pins
The Evaluation product has not only the functions of the MB95110M series but also those of other products to
support software development for multiple series and models of the F
peripheral resources not used by the MB95110M series are therefore access-barred. Read/write access to these
access-barred addresses may cause peripheral resources supposed to be unused to operate, resulting in
unexpected malfunctions of hardware or software.
Particularly, do not use word access to odd numbered byte address in the prohibited areas (If these access are
used, the address may be read or write unexpectedly) .
Also, as the read values of prohibited addresses on the evaluation product are different to the values on the
Flash memory and MASK ROM products, do not use these values in the program.
The functions corresponding to certain bits in single-byte registers may not be supported on some MASK ROM
products and Flash memory products. However, reading or writing to these bits will not cause malfunction of the
hardware. Also, as the evaluation, Flash memory products are designed to have identical software operation,
no particular precautions are required.
If the amount of memory on the Evaluation product is different from that of the Flash memory or MASK ROM
product, carefully check the difference in the amount of memory from the model to be actually used when
developing software.
For details of memory space, refer to “■ CPU CORE”.
• The current consumption of Flash memory product is typically greater than for MASK ROM product.
• For details of current consumption, refer to “■ ELECTRICAL CHARACTERISTICS”.
A pull-down resistor is provided for the MOD pin of the MASK ROM product.
For details of information on each package, refer to “■ PACKAGE AND CORRESPONDING PRODUCTS” and
“■ PACKAGE DIMENSIONS”.
The operating voltage are different among the Evaluation, Flash memory, and MASK ROM products.
For details of operating voltage, refer to “■ ELECTRICAL CHARACTERISTICS”
MB95110M Series
2
MC-8FX family. The I/O addresses for
7