LPC2292FET144/01,5 NXP Semiconductors, LPC2292FET144/01,5 Datasheet - Page 21

• Manufacturer Part Number: LPC2292FET144/01,5
• Description: IC ARM7 MCU FLASH 256K 144TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2200r

Specifications of LPC2292FET144/01,5

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 60MHz
• Connectivity: CAN, EBI/EMI, I²C, Microwire, SPI, SSI, SSP, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-TFBGA
• Processor Series: LPC22
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: CAN, I2C, JTAG, SPI, SSP, UART
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 112
• Number Of Timers: 2
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 144TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 60 MHz
• For Use With: OM10091 - KIT DEV PHYCORE-ARM7/LPC2220622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K568-1757 - BOARD EVAL FOR LPC220X ARM MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-4320; 935284897551; LPC2292FET144/01-S; LPC2292FET144/01-S

NXP Semiconductors
LPC2292_2294_7
Product data sheet
6.12.1 Features
6.13.1 Features
6.13.2 Features available in LPC2292/LPC2294/01 only
6.13 SPI serial I/O controller
capability to both receive and send information (such as memory). Transmitters and/or
receivers can operate in either master or slave mode, depending on whether the chip has
to initiate a data transfer or is only addressed. The I
controlled by more than one bus master connected to it.
The I
I
The LPC2292/LPC2294 each contain two SPIs. The SPI is a full duplex serial interface,
designed to be able to handle multiple masters and slaves connected to a given bus. Only
a single master and a single slave can communicate on the interface during a given data
transfer. During a data transfer the master always sends a byte of data to the slave, and
the slave always sends a byte of data to the master.
2
C-bus).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Compliant with standard I
Easy to configure as master, slave, or master/slave.
Programmable clocks allow versatile rate control.
Bidirectional data transfer between masters and slaves.
Multi-master bus (no central master).
Arbitration between simultaneously transmitting masters without corruption of serial
data on the bus.
Serial clock synchronization allows devices with different bit rates to communicate via
one serial bus.
Serial clock synchronization can be used as a handshake mechanism to suspend and
resume serial transfer.
The I
Compliant with Serial Peripheral Interface (SPI) specification.
Synchronous, Serial, Full Duplex communication.
Combined SPI master and slave.
Maximum data bit rate of
Eight to 16 bits per frame.
When the SPI interface is used in Master mode, the SSELn pin is not needed (can be
used for a different function).
2
C-bus implemented in LPC2292/LPC2294 supports bit rate up to 400 kbit/s (Fast
2
C-bus may be used for test and diagnostic purposes.
Rev. 7 — 4 December 2008
16/32-bit ARM microcontrollers with external memory interface
1
2
C-bus interface.
8
of the input clock rate.
LPC2292/LPC2294
2
C-bus is a multi-master bus, it can be
© NXP B.V. 2008. All rights reserved.
21 of 53