ATA6613P-PLQW Atmel, ATA6613P-PLQW Datasheet - Page 125

• Manufacturer Part Number: ATA6613P-PLQW
• Description: MCU W/LIN TXRX REG WTCHDG 48-QFN
• Manufacturer: Atmel
• Series: AVR® ATA66 LIN-SBCr

Specifications of ATA6613P-PLQW

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-QFN Exposed Pad
• Processor Series: ATA6x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.12.8
6.12.8.1
9111H–AUTO–01/11
8-bit Timer/Counter Register Description
Timer/Counter Control Register A – TCCR0A
Table 6-44.
Table 6-45
mode.
Table 6-45.
Note:
• Bits 7:6 – COM0A1:0: Compare Match Output A Mode
Read/Write
Initial Value
COM0A1
COM0A1
These bits control the Output Compare pin (OC0A) behavior. If one or both of the
COM0A1:0 bits are set, the OC0A output overrides the normal port functionality of the I/O
pin it is connected to. However, note that the Data Direction Register (DDR) bit corre-
sponding to the OC0A pin must be set in order to enable the output driver.
When OC0A is connected to the pin, the function of the COM0A1:0 bits depends on the
WGM02:0 bit setting.
WGM02:0 bits are set to a normal or CTC mode (non-PWM).
Bit
0
0
1
1
0
0
1
1
1. A special case occurs when OCR0A equals TOP and COM0A1 is set. In this case, the Com-
shows the COM0A1:0 bit functionality when the WGM01:0 bits are set to fast PWM
pare Match is ignored, but the set or clear is done at TOP. See
120
COM0A1 COM0A0 COM0B1 COM0B0
Compare Output Mode, non-PWM Mode
Compare Output Mode, Fast PWM Mode
for more details.
R/W
7
0
COM0A0
COM0A0
0
1
0
1
0
1
0
1
R/W
6
0
Table 6-44
Description
Normal port operation, OC0A disconnected.
Toggle OC0A on Compare Match
Clear OC0A on Compare Match
Set OC0A on Compare Match
Description
Normal port operation, OC0A disconnected.
WGM02 = 0: Normal Port Operation, OC0A Disconnected.
WGM02 = 1: Toggle OC0A on Compare Match.
Clear OC0A on Compare Match, set OC0A at TOP
Set OC0A on Compare Match, clear OC0A at TOP
R/W
5
0
shows the COM0A1:0 bit functionality when the
R/W
4
0
Atmel ATA6612/ATA6613
R
3
–
0
(1)
R
2
–
0
WGM01 WGM00
“Fast PWM Mode” on page
R/W
1
0
R/W
0
0
TCCR0A
125