ATA6613P-PLQW Atmel, ATA6613P-PLQW Datasheet - Page 74

• Manufacturer Part Number: ATA6613P-PLQW
• Description: MCU W/LIN TXRX REG WTCHDG 48-QFN
• Manufacturer: Atmel
• Series: AVR® ATA66 LIN-SBCr

Specifications of ATA6613P-PLQW

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-QFN Exposed Pad
• Processor Series: ATA6x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.8.9
74
Atmel ATA6612/ATA6613
Watchdog Timer
Table 6-23.
Note:
Atmel
Figure 6-21. Watchdog Timer
The Watchdog Timer (WDT) is a timer counting cycles of a separate on-chip 128kHz oscilla-
tor. The WDT gives an interrupt or a system reset when the counter reaches a given time-out
value. In normal operation mode, it is required that the system uses the WDR - Watchdog
Timer Reset - instruction to restart the counter before the time-out value is reached. If the sys-
tem doesn't restart the counter, an interrupt or system reset will be issued.
• Clocked from separate On-chip Oscillator
• 3 Operating modes
• Selectable Time-out period from 16ms to 8s
• Possible Hardware fuse Watchdog always on (WDTON) for fail-safe mode
Symbol
V
t
I
BG
BG
BG
– Interrupt
– System Reset
– Interrupt and System Reset
®
ATA6612/ATA6613 has an Enhanced Watchdog Timer (WDT). The main features are:
1. Values are guidelines only. Actual values are TBD.
WATCHDOG
RESET
Parameter
Bandgap reference voltage
Bandgap reference start-up time
Bandgap reference current consumption
OSCILLATOR
Internal Voltage Reference Characteristics
128kHz
WDIF
WDIE
WDE
PRESCALER
WATCHOG
Condition
TBD
TBD
TBD
(1)
Min
1.0
WDP0
WDP1
WDP2
WDP3
MCU RESET
INTERRUPT
Typ
1.1
40
10
9111H–AUTO–01/11
Max
TBD
1.2
70
Units
µA
µs
V