PIC18LF4455-I/PT Microchip Technology, PIC18LF4455-I/PT Datasheet - Page 45

• Manufacturer Part Number: PIC18LF4455-I/PT
• Description: IC PIC MCU FLASH 12KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF4455-I/PT

• Core Size: 8-Bit
• Program Memory Size: 24KB (12K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC18
• No. Of I/o's: 36
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 2048Byte
• Cpu Speed: 48MHz
• No. Of Timers: 4
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, I2C, EAUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163025
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

3.5.4
Certain exits from power-managed modes do not
invoke the OST at all. There are two cases:
• PRI_IDLE mode, where the primary clock source
• the primary clock source is not any of the XT or
TABLE 3-2:
© 2009 Microchip Technology Inc.
Note 1:
is not stopped; and
HS modes.
Primary Device Clock
T1OSC or INTRC
2:
3:
4:
5:
(PRI_IDLE mode)
Before Wake-up
(Sleep mode)
INTOSC
In this instance, refers specifically to the 31 kHz INTRC clock source.
T
concurrently with any other required delays (see Section 3.4 “Idle Modes”).
Includes both the INTOSC 8 MHz source and postscaler derived frequencies.
T
(parameter F12, Table 28-9); it is also designated as T
Execution continues during T
EXIT WITHOUT AN OSCILLATOR
START-UP DELAY
CSD
OST
None
(parameter 38, Table 28-12) is a required delay when waking from Sleep and all Idle modes and runs
is the Oscillator Start-up Timer period (parameter 32, Table 28-12). t
Microcontroller Clock Source
EXIT DELAY ON WAKE-UP BY RESET FROM SLEEP MODE OR ANY IDLE MODE
(BY CLOCK SOURCES)
(3)
(1)
IOBST
After Wake-up
XTPLL, HSPLL
XTPLL, HSPLL
XTPLL, HSPLL
XTPLL, HSPLL
INTOSC
INTOSC
INTOSC
INTOSC
PIC18F2455/2550/4455/4550
XT, HS
XT, HS
XT, HS
XT, HS
(parameter 39, Table 28-12), the INTOSC stabilization period.
EC
EC
EC
EC
(3)
(3)
(3)
(3)
In these instances, the primary clock source either
does not require an oscillator start-up delay, since it is
already running (PRI_IDLE), or normally does not
require an oscillator start-up delay (EC and any internal
oscillator modes). However, a fixed delay of interval
T
leaving Sleep and Idle modes to allow the CPU to
prepare for execution. Instruction execution resumes
on the first clock cycle following this delay.
CSD
PLL
.
following the wake event is still required when
T
T
T
Exit Delay
OST
OST
OST
T
T
T
T
T
T
T
T
IOBST
IOBST
None
None
OST
CSD
OST
CSD
OST
CSD
+ t
+ t
+ t
(4)
(2)
(4)
(2)
(4)
(2)
rc
rc
rc
(5)
(5)
(4)
(4)
(4)
rc
is the PLL lock time-out
Clock Ready Status
Bit (OSCCON)
DS39632E-page 43
OSTS
OSTS
OSTS
OSTS
IOFS
IOFS
IOFS
IOFS