AT32UC3A1128-AUT Atmel, AT32UC3A1128-AUT Datasheet - Page 515

• Manufacturer Part Number: AT32UC3A1128-AUT
• Description: IC MCU AVR32 128KB FLASH 100TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3A1128-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: Ethernet, I²C, SPI, SSC, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Controller Family/series: AT32UC3A
• No. Of I/o's: 69
• Ram Memory Size: 32KB
• Cpu Speed: 66MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, RS-485, SPI, USART
• Maximum Clock Frequency: 66 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL, KSK-EVK1100-PL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1100, ATEVK1105
• Minimum Operating Temperature: - 40 C
• Package: 100TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 66 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATSTK600-TQFP100 - STK600 SOCKET/ADAPTER 100-TQFPATEVK1100 - KIT DEV/EVAL FOR AVR32 AT32UC3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

30.7.2.11.2 Control Write
Figure 30-15. Control Write
30.7.2.11.3 Control Read
Figure 30-16. Control Read
32058J–AVR32–04/11
USB Bus
RXSTPI
RXOUTI
TXINI
Wr Enable
HOST
Wr Enable
CPU
USB Bus
RXSTPI
RXOUTI
TXINI
SETUP
SETUP
Figure 30-15
necessarily send a NAK on the first IN token:
Figure 30-16
neous write requests from the CPU and the USB host.
A NAK handshake is always generated on the first status stage command.
When the controller detects the status stage, all the data written by the CPU is lost and clearing
TXINI has no effect.
The firmware checks if the transmission or the reception is complete.
SETUP
HW
•the Received OUT Data interrupt (RXOUTI) which is raised when a new OUT packet is
•the Transmitted IN Data interrupt (TXINI) which is raised when the current bank is ready to
•if the firmware knows the exact number of descriptor bytes that must be read, it can then
•or it can read the bytes and wait for the NAKed IN interrupt (NAKINI) which tells that all the
SETUP
received and which shall be cleared by firmware to acknowledge the packet and to free the
bank;
accept a new IN packet and which shall be cleared by firmware to send the packet.
anticipate the status stage and send a zero-length packet after the next IN token;
bytes have been sent by the host and that the transaction is now in the status stage.
HW
SW
SW
SW
shows a control read transaction. The USB controller has to manage the simulta-
shows a control write transaction. During the status stage, the controller will not
IN
HW
OUT
HW
DATA
SW
SW
DATA
IN
OUT
HW
SW
OUT
NAK
NAK
IN
STATUS
STATUS
SW
OUT
HW
IN
AT32UC3A
SW
515