AT32UC3A1128-AUT Atmel, AT32UC3A1128-AUT Datasheet - Page 599

• Manufacturer Part Number: AT32UC3A1128-AUT
• Description: IC MCU AVR32 128KB FLASH 100TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3A1128-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: Ethernet, I²C, SPI, SSC, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Controller Family/series: AT32UC3A
• No. Of I/o's: 69
• Ram Memory Size: 32KB
• Cpu Speed: 66MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, RS-485, SPI, USART
• Maximum Clock Frequency: 66 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL, KSK-EVK1100-PL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1100, ATEVK1105
• Minimum Operating Temperature: - 40 C
• Package: 100TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 66 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATSTK600-TQFP100 - STK600 SOCKET/ADAPTER 100-TQFPATEVK1100 - KIT DEV/EVAL FOR AVR32 AT32UC3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

• HWUPI: Host Wake-Up Interrupt Flag
Asynchronous interrupt.
Set by hardware in the following cases :
Note that this interrupt is generated even if the clock is frozen by the FRZCLK bit.
• PXINT, X in [0..6]: Pipe X Interrupt Flag
Set by hardware when an interrupt is triggered by the endpoint X (UPSTAX). This triggers a USB interrupt if the corre-
sponding pipe interrupt enable bit is set (UHINTE register). Cleared by hardware when the interrupt source is served.
• DMAXINT, X in [1..6]: DMA Channel X Interrupt Flag
Set by hardware when an interrupt is triggered by the DMA channel X. This triggers a USB interrupt if the corresponding
DMAXINTE is set (UHINTE register).
Cleared by hardware when the UHDMAX_STATUS interrupt source is cleared.
32058J–AVR32–04/11
– The Host controller is in the suspend mode (SOFE=0) and an upstream resume from
– The Host controller is in the suspend mode (SOFE=0) and a Peripheral disconnection
– The Host controller is in the Idle state (VBUSRQ=0, no VBus is generated), and an
the Peripheral is detected.
is detected.
OTG SRP event initiated by the Peripheral is detected.
AT32UC3A
599