PIC32MX795F512L-80I/PF Microchip Technology, PIC32MX795F512L-80I/PF Datasheet - Page 105

• Manufacturer Part Number: PIC32MX795F512L-80I/PF
• Description: IC MCU 32BIT 512KB FLASH 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX795F512L-80I/PF

• Core Size: 32-Bit
• Program Memory Size: 512KB (512K x 8)
• Core Processor: MIPS32® M4K™
• Speed: 80MHz
• Connectivity: CAN, Ethernet, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP
• Controller Family/series: PIC32
• Ram Memory Size: 128KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Interface: CAN, I2C, SPI, UART, USB
• No. Of Pwm Channels: 5
• Embedded Interface Type: CAN, I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: PIC32MX7xx
• Core: MIPS
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

5.0
 2009 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
FLASH PROGRAM MEMORY
of the PIC32MX5XX/6XX/7XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 5. “Flash Pro-
gram
“PIC32MX Family Reference Manual”,
which is available from the Microchip web
site (www.microchip.com/PIC32).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
Memory”
(DS61121)
in
the
Preliminary
PIC32MX5XX/6XX/7XX
PIC32MX5XX/6XX/7XX devices contain an internal
Flash program memory for executing user code. There
are three methods by which the user can program this
memory:
1.
2.
3.
RTSP is performed by software executing from either
Flash or RAM memory. Information about RTSP tech-
niques is available in Section 5. “Flash Program
Memory” (DS61121) in the “PIC32MX Family Refer-
ence Manual”.
EJTAG is performed using the EJTAG port of the
device and an EJTAG capable programmer.
ICSP is performed using a serial data connection to the
device and allows much faster programming times than
RTSP.
The EJTAG and ICSP methods are described in the
“PIC32MX
(DS61145), which can be downloaded from the
Microchip web site.
Run-Time Self Programming (RTSP)
EJTAG Programming
In-Circuit Serial Programming™ (ICSP™)
Flash
Programming
DS61156B-page 105
Specification”