ST7FLITEU09M6 STMicroelectronics, ST7FLITEU09M6 Datasheet - Page 16

• Manufacturer Part Number: ST7FLITEU09M6
• Description: MCU 8BIT SGL VOLT FLASH SO-8
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITEU09M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 5
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (3.9mm Width)
• Processor Series: ST7FLITEUx
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: ICC
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7FLITU0-D/RAIS, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• Cpu Family: ST7
• Device Core Size: 8b
• Frequency (max): 8MHz
• Total Internal Ram Size: 128Byte
• # I/os (max): 5
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 3.3V
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 8
• Package Type: SO N
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connectivity: -
• Lead Free Status / Rohs Status: Details

Register & memory map
3
Note:
16/139
Register & memory map
As shown in
registers.
The available memory locations consist of 128 bytes of register locations, 128 bytes of RAM
and 1 Kbyte of user program memory. The RAM space includes up to 64 bytes for the stack
from 00C0h to 00FFh.
The highest address bytes contain the user reset and interrupt vectors.
The Flash memory contains two sectors (see
addressing space so the reset and interrupt vectors are located in Sector 0 (FC00-FFFFh).
The size of Flash Sector 0 and other device options are configurable by Option byte.
Important: Memory locations marked as “Reserved” must never be accessed. Accessing a
reseved area can have unpredictable effects on the device.
Figure 5.
1. see
DEE0h, DEE1h, DEE2h and DEE3h addresses are located in a reserved area but are
special bytes containing also the RC calibration values which are read-accessible only in
user mode. If all the EEPROM data or Flash space (including the RC calibration values
locations) has been erased (after the readout protection removal), then the RC calibration
values can still be obtained through these addresses.
FFDFh
0FFFh
F7FFh
FFE0h
FFFFh
00FFh
0000h
007Fh
0080h
0100h
1000h
107Fh
1080h
F800h
Section 7.2 on page
Interrupt & reset vectors
(see
Figure
Memory map
Flash memory
HW registers
(see
(128 Bytes)
(128 Bytes)
Table
EEPROM
Reserved
Reserved
Data
RAM
(2K)
Table
5, the MCU is capable of addressing 64 Kbytes of memories and I/O
10)
)
32.
F800h
FBFFh
FC00h
FFFFh
00FFh
0080h
00C0h
Short addressing
RAM (zero page)
PROGRAM MEMORY
64-Byte Stack
Figure
2K FLASH
SECTOR 1
SECTOR 0
1 Kbyte
1 Kbyte
5) mapped in the upper part of the ST7
DEE0h
DEE1h
DEE2h
DEE3h
1)
ST7LITEU05 ST7LITEU09
RCCRH0
RCCRL0
RCCRH1
RCCRL1