Z8F012ASB020EG Zilog, Z8F012ASB020EG Datasheet - Page 192

• Manufacturer Part Number: Z8F012ASB020EG
• Description: IC ENCORE XP MCU FLASH 1K 8SOIC
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F012ASB020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: IrDA, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, LVD, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 6
• Program Memory Size: 1KB (1K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 16 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 8-SOIC (3.9mm Width)
• Processor Series: Z8F012Ax
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 6
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z8F04A08100KITG, Z8F04A28100KITG, ZENETSC0100ZACG, ZENETSC0100ZACG, ZUSBOPTSC01ZACG, ZUSBSC00100ZAC, ZUSBSC00100ZACG
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4038; Z8F012ASB020EG

PS022825-0908
•
•
•
•
•
Write Memory, Read Memory, Write Register, Read Register, Read Memory CRC,
Step Instruction, Stuff Instruction, and Execute Instruction commands.
DBG
DBG
DBG
Write OCD Control Register (04H)—The Write OCD Control Register command
writes the data that follows to the OCDCTL register. When the Flash Read Protect
Option Bit is enabled, the DBGMODE bit (
be cleared to 0 and the only method of returning the device to normal operating mode
is to reset the device.
DBG
DBG
Read OCD Control Register (05H)—The Read OCD Control Register command
reads the value of the OCDCTL register.
DBG
DBG
Write Program Counter (06H)—The Write Program Counter command writes the
data that follows to the eZ8 CPU’s Program Counter (PC). If the device is not in DE-
BUG mode or if the Flash Read Protect Option bit is enabled, the Program Counter
(PC) values are discarded.
DBG
DBG
DBG
Read Program Counter (07H)—The Read Program Counter command reads the
value in the eZ8 CPU’s Program Counter (PC). If the device is not in DEBUG mode
or if the Flash Read Protect Option bit is enabled, this command returns
DBG
DBG
DBG
Write Register (08H)—The Write Register command writes data to the Register
File. Data can be written 1–256 bytes at a time (256 bytes can be written by setting
size to 0). If the device is not in DEBUG mode, the address and data values are dis-
carded. If the Flash Read Protect Option bit is enabled, only writes to the Flash Con-
trol Registers are allowed and all other register write data values are discarded.
DBG
DBG
DBG
DBG
DBG
←
→
→
←
←
←
→
←
←
←
←
→
→
←
←
←
←
←
03H
RuntimeCounter[15:8]
RuntimeCounter[7:0]
04H
OCDCTL[7:0]
05H
OCDCTL[7:0]
06H
ProgramCounter[15:8]
ProgramCounter[7:0]
07H
ProgramCounter[15:8]
ProgramCounter[7:0]
08H
{4’h0,Register Address[11:8]}
Register Address[7:0]
Size[7:0]
1-256 data bytes
OCDCTL
Z8 Encore! XP
[7]) can only be set to 1, it cannot
Product Specification
®
On-Chip Debugger
F082A Series
FFFFH
.
181