MCHC908GR8ACFAE Freescale Semiconductor, MCHC908GR8ACFAE Datasheet - Page 91

• Manufacturer Part Number: MCHC908GR8ACFAE
• Description: IC MCU 8K FLASH 8MHZ 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908GR8ACFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 21
• Program Memory Size: 7.5KB (7.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Controller Family/series: HC08
• No. Of I/o's: 21
• Ram Memory Size: 384Byte
• Cpu Speed: 8MHz
• No. Of Timers: 2
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• Processor Series: HC08G
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8.2 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68CBL05CE, M68EML08GPGTE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

quantized steps as the DLF increments or decrements its output. The following sections describe how
each block will affect the output frequency.
7.4.4.1 Digitally Controlled Oscillator
The digitally controlled oscillator (DCO) is an inaccurate oscillator which generates the internal clock
(ICLK), whose clock period is dependent on the digital loop filter outputs (DSTG[7:0] and DDIV[3:0]).
Because of the digital nature of the DCO, the clock period of ICLK will change in quantized steps. This
will create a clock period difference or quantization error (Q-ERR) from one cycle to the next. Over several
cycles or for longer periods, this error is divided out until it reaches a minimum error of 0.202 percent to
0.368 percent. The dependence of this error on the DDIV[3:0] value and the number of cycles the error is
measured over is shown in
7.4.4.2 Binary Weighted Divider
The binary weighted divider divides the output of the ring oscillator by a power of two, specified by the
DCO divider control bits (DDIV[3:0]). DDIV maximizes at %1001 (values of %1010 through %1111 are
interpreted as %1001), which corresponds to a divide by 512. When DDIV is %0000, the ring oscillator’s
output is divided by 1. Incrementing DDIV by one will double the period; decrementing DDIV will halve the
period. The DLF cannot directly increment or decrement DDIV; DDIV is only incremented or decremented
when an addition or subtraction to DSTG carries or borrows.
7.4.4.3 Variable-Delay Ring Oscillator
The variable-delay ring oscillator’s period is adjustable from 17 to 31 stage delays, in increments of two,
based on the upper three DCO stage control bits (DSTG[7:5]). A DSTG[7:5] of %000 corresponds to 17
stage delays; DSTG[7:5] of %111 corresponds to 31 stage delays. Adjusting the DSTG[5] bit has a 6.45
percent to 11.8 percent effect on the output frequency. This also corresponds to the size correction made
when the frequency error is greater than ±15 percent. The value of the binary weighted divider does not
affect the relative change in output clock period for a given change in DSTG[7:5].
Freescale Semiconductor
%0101–%1001 (max)
MC68HC908GT16 • MC68HC908GT8 • MC68HC08GT16 Data Sheet, Rev. 5.0
%0000 (min)
%0000 (min)
%0000 (min)
DDIV[3:0]
%0001
%0001
%0001
%0010
%0010
%0010
%0011
%0011
%0100
%0100
Table
Table 7-2. Quantization Error in ICLK
7-2.
ICLK Cycles
≥ 32
≥ 16
≥ 8
≥ 4
≥ 2
≥ 1
1
4
1
4
1
4
1
1
Bus Cycles
NA
NA
NA
NA
NA
≥ 8
≥ 4
≥ 2
≥ 1
≥ 1
≥ 1
1
1
1
0.202%–0.368%
0.202%–0.368%
0.403%–0.735%
0.202%–0.368%
0.202%–0.368%
0.403%–0.735%
0.202%–0.368%
0.202%–0.368%
0.806%–1.47%
0.806%–1.47%
6.45%–11.8%
1.61%–2.94%
3.23%–5.88%
1.61%–2.94%
τ
ICLK
Q-ERR
Usage Notes
91