MC9S12XEQ384MAG Freescale Semiconductor, MC9S12XEQ384MAG Datasheet - Page 1007

• Manufacturer Part Number: MC9S12XEQ384MAG
• Description: MCU 16BIT 384K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XEQ384MAG

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 119
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LQFP
• Processor Series: S12XE
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 24 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 119
• Number Of Timers: 25
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 24 Channel
• Package: 144LQFP
• Family Name: HCS12X
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|2.8|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

26.4.2.17 Program D-Flash Command
The Program D-Flash operation programs one to four previously erased words in the D-Flash user
partition. The Program D-Flash operation will confirm that the targeted location(s) were successfully
programmed upon completion.
Upon clearing CCIF to launch the Program D-Flash command, the user-supplied words will be transferred
to the Memory Controller and be programmed. The CCOBIX index value at Program D-Flash command
launch determines how many words will be programmed in the D-Flash block. No protection checks are
made in the Program D-Flash operation on the D-Flash block, only access error checks. The CCIF flag is
set when the operation has completed.
Freescale Semiconductor
FERSTAT
Register
FSTAT
A Flash word must be in the erased state before being programmed.
Cumulative programming of bits within a Flash word is not allowed.
Table 26-66. Erase Verify D-Flash Section Command Error Handling
CCOBIX[2:0]
Table 26-67. Program D-Flash Command FCCOB Requirements
MGSTAT1
MGSTAT0
EPVIOLIF
ACCERR
Error Bit
FPVIOL
000
001
010
011
100
101
MC9S12XE-Family Reference Manual , Rev. 1.23
Set if CCOBIX[2:0] != 010 at command launch
Set if a Load Data Field command sequence is currently active
Set if command not available in current mode (see
Set if an invalid global address [22:0] is supplied
Set if a misaligned word address is supplied (global address [0] != 0)
Set if the global address [22:0] points to an area of the D-Flash EEE partition
Set if the requested section breaches the end of the D-Flash block or goes into
the D-Flash EEE partition
None
Set if any errors have been encountered during the read
Set if any non-correctable errors have been encountered during the read
None
Global address [15:0] of word to be programmed
0x11
Word 1 program value, if desired
Word 2 program value, if desired
Word 3 program value, if desired
CAUTION
Word 0 program value
FCCOB Parameters
Error Condition
Chapter 26 384 KByte Flash Module (S12XFTM384K2V1)
Global address [22:16] to
identify the D-Flash block
Table
26-30)
1007