MC9S12DT256MPVE Freescale Semiconductor, MC9S12DT256MPVE Datasheet - Page 1153

• Manufacturer Part Number: MC9S12DT256MPVE
• Description: IC MCU 256K FLASH 25MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12DT256MPVE

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.25 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 112-LQFP
• Processor Series: S12D
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: CAN/I2C/SCI/SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 1
• Operating Supply Voltage: 5 V to 2.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: M68KIT912DP256
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (8-ch x 10-bit)
• No. Of I/o's: 91
• Eeprom Memory Size: 4KB
• Ram Memory Size: 12KB
• Cpu Speed: 25MHz
• No. Of Timers: 1
• No. Of Pwm Channels: 8
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All bits in the FSEC register are readable but are not writable.
The FSEC register is loaded from the Flash Configuration Field at address 0x7F_FF0F during the reset
sequence, indicated by F in
The security function in the Flash module is described in
28.3.2.3
The FTSTMOD register is used to control Flash test features.
Freescale Semiconductor
KEYEN[1:0]
RNV[5:2]
SEC[1:0]
Reset
Field
7:6
5:2
1:0
W
R
Backdoor Key Security Enable Bits — The KEYEN[1:0] bits define the enabling of backdoor key access to the
Flash module as shown in
Reserved Nonvolatile Bits — The RNV[5:2] bits should remain in the erased state for future enhancements.
Flash Security Bits — The SEC[1:0] bits define the security state of the MCU as shown in
Flash module is unsecured using backdoor key access, the SEC[1:0] bits are forced to 1:0.
Flash Test Mode Register (FTSTMOD)
F
7
KEYEN
= Unimplemented or Reserved
1 Preferred KEYEN state to disable Backdoor Key Access.
1 Preferred SEC state to set MCU to secured state.
F
6
Figure
KEYEN[1:0]
SEC[1:0]
Figure 28-5. Flash Security Register (FSEC)
01
01
00
10
11
00
10
11
1
1
Table
Table 28-3. FSEC Field Descriptions
28-5.
MC9S12XDP512 Data Sheet, Rev. 2.21
RNV5
Table 28-5. Flash Security States
Table 28-4. Flash KEYEN States
F
5
28-4.
RNV4
Status of Backdoor Key Access
F
4
Description
Status of Security
Section 28.6, “Flash Module
UNSECURED
DISABLED
DISABLED
DISABLED
SECURED
SECURED
SECURED
ENABLED
RNV3
Chapter 28 256 Kbyte Flash Module (S12XFTX256K2V1)
F
3
RNV2
F
2
F
1
Security”.
Table
SEC
28-5. If the
F
0
1155