M30620FCAFP#U5 Renesas Electronics America, M30620FCAFP#U5 Datasheet - Page 415

• Manufacturer Part Number: M30620FCAFP#U5
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30620FCAFP#U5

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: M16C
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 87
• Interface Type: SIM/UART
• On-chip Adc: 10-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

2-96
UART
Operation
2.5.5 Operation of Serial I/O (reception used for SIM interface)
In receiving data in UART mode (used for SIM interface), choose functions from those listed in Table
2.5.7. Operations of the circled items are described below. Figure 2.5.17 shows the operation timing, and
Figures 2.5.18 and 2.5.19 show the set-up procedures.
Figure 2.5.7. Choosed functions
(1) Setting the transmit enable bit and receive enable bit to “1” readies data-receivable status.
(2) When the first bit (the start bit) of reception data is received from the RxD
(3) When the stop bit(s) is (are) received, the content of the UART2 receive register is transmit-
(4) The receive complete flag goes to “0” when the lower-order byte of the UART2 buffer register
(5) When the parity error is occurred, T
Transfer data
format
ceived, bit by bit, in sequence: LSB, ····, MSB, and stop bit(s).
ted to the UART2 receive buffer register.
At this time, the receive complete flag goes to “1” to indicate that the reception is completed,
the UART2 receive interrupt request bit goes to “1”, and output from the RTS pin goes to “H”
level.
is read.
Item
O
Inverse format
Direct format
Set-up
X
D
2
pin goes to “L” level.
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
_______
M16C / 62A Group
Mitsubishi microcomputers
2
pin, data is re-