UPD78F0500MC-5A4-A Renesas Electronics America, UPD78F0500MC-5A4-A Datasheet - Page 78

• Manufacturer Part Number: UPD78F0500MC-5A4-A
• Description: MCU 8BIT FLASH SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0500MC-5A4-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
2.2 Description of Pin Functions
2.2.1 P00 to P06 (port 0)
select input.
Note The 78K0/KE2 products whose flash memory is less than 32 KB and 78K0/KD2 products are only provided with
Remark √: Mounted, −: Not mounted
(1) Port mode
(2) Control mode
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
P00/TI000
P01/TI010/TO00
P02/SO11
P03/SI11
P04/SCK11
P05/TI001/SSI11
P06/TI011/TO01
Remark The pins mounted depend on the product. See 1.4 Ordering Information and 2.1 Pin Function List.
P00 to P06 function as an I/O port. These pins also function as timer I/O, serial interface data I/O, clock I/O, and chip
The following operation modes can be specified in 1-bit units.
P00 to P06 function as an I/O port. P00 to P06 can be set to input or output port in 1-bit units using port mode
register 0 (PM0). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 0 (PU0).
P00 to P06 function as timer I/O, serial interface data I/O, clock I/O, and chip select input.
(a) TI000, TI001
(b) TI010, TI011
(c) TO00, TO01
port functions and not alternate functions.
These are the pins for inputting an external count clock to 16-bit timer/event counters 00 and 01 and are also for
inputting a capture trigger signal to the capture registers (CR000, CR010 or CR001, CR011) of 16-bit timer/event
counters 00 and 01.
These are the pins for inputting a capture trigger signal to the capture register (CR000 or CR001) of 16-bit
timer/event counters 00 and 01.
These are timer output pins of 16-bit timer/event counters 00 and 01.
78K0/KB2
√
√
−
−
−
−
−
78K0/KC2
78K0/KD2
P02
P03
√
√
−
−
−
Note
Note
whose flash
memory is
less than
Products
P02
P03
P04
P05
P06
32 KB
√
√
Note
Note
Note
Note
Note
78K0/KE2
CHAPTER 2 PIN FUNCTIONS
memory is at
whose flash
Products
48 KB
least
√
√
√
√
√
√
√
78K0/KF2
78