UPD70F3735GK-GAK-AX Renesas Electronics America, UPD70F3735GK-GAK-AX Datasheet - Page 428

• Manufacturer Part Number: UPD70F3735GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GK-GAK-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
13.5.5 Power-fail compare mode
registers.
select mode, continuous scan mode, one-shot select mode, and one-shot scan mode.
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
The A/D conversion end interrupt request signal (INTAD) can be controlled as follows by the ADA0PFM and ADA0PFT
• When the ADA0PFM.ADA0PFE bit = 0, the INTAD signal is generated each time conversion is completed (normal
• When the ADA0PFE bit = 1 and when the ADA0PFM.ADA0PFC bit = 0, the value of the ADA0CRnH register is
• When the ADA0PFE bit = 1 and when the ADA0PFC bit = 1, the value of the ADA0CRnH register is compared with
In the power-fail compare mode, four modes are available as modes in which to set the ANI0 to ANI7 pins: continuous
use of the A/D converter).
compared with the value of the ADA0PFT register when conversion is completed, and the INTAD signal is generated
only if ADA0CRnH ≥ ADA0PFT.
the value of the ADA0PFT register when conversion is completed, and the INTAD signal is generated only if
ADA0CRnH < ADA0PFT.
Remark
n = 0 to 7
CHAPTER 13 A/D CONVERTER
Page 412 of 816