UPD78F0138HGK-9ET-A Renesas Electronics America, UPD78F0138HGK-9ET-A Datasheet - Page 42

• Manufacturer Part Number: UPD78F0138HGK-9ET-A
• Description: MCU 8BIT 60K FLASH 64TQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx1+r

Specifications of UPD78F0138HGK-9ET-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: 3-Wire SIO, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 42
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

2.2.7 P60 to P63 (port 6)
mode register 6 (PM6).
2.2.8 P70 to P77 (port 7)
(1) Port mode
(2) Control mode
2.2.9 P120 (port 12)
(1) Port mode
(2) Control mode
2.2.10 P130 (port 13)
2.2.11 P140 and P141 (port 14)
output, and buzzer output pins.
(1) Port mode
(2) Control mode
40
P60 to P63 function as a 4-bit I/O port. P60 to P63 can be set to input port or output port in 1-bit units using port
P60 to P63 are N-ch open-drain pins.
P70 to P77 function as an 8-bit I/O port. These pins also function as key interrupt input pins.
The following operation modes can be specified in 1-bit units.
P120 functions as a 1-bit I/O port. This pin also functions as a pin for external interrupt request input.
The following operation modes can be specified.
P130 functions as a 1-bit output-only port.
P140 and P141 function as a 2-bit I/O port. These pins also function as external interrupt request input, clock
The following operation modes can be specified in 1-bit units.
P70 to P77 function as an 8-bit I/O port. P70 to P77 can be set to input or output in 1-bit units using port mode
register 7 (PM7). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 7 (PU7).
P70 to P77 function as key interrupt input pins.
P120 functions as a 1-bit I/O port. P120 can be set to input or output using port mode register 12 (PM12). Use of
an on-chip pull-up resistor can be specified by pull-up resistor option register 12 (PU12).
P120 functions as an external interrupt request input pin (INTP0) for which the valid edge (rising edge, falling
edge, or both rising and falling edges) can be specified.
P140 and P141 function as a 2-bit I/O port. P140 and P141 can be set to input or output in 1-bit units using port
mode register 14 (PM14). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 14
(PU14).
P140 and P141 function as external interrupt request input, clock output, and buzzer output pins.
(a) INTP6, INTP7
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
CHAPTER 2 PIN FUNCTIONS
User’s Manual U16899EJ3V0UD