AC4486-5M Laird Technologies, AC4486-5M Datasheet - Page 30

• Manufacturer Part Number: AC4486-5M
• Description: TXRX 868MHZ 3V TTL 5MW RS232
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of AC4486-5M

• Frequency: 868MHz
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: FSK
• Applications: AMR, Gaming Devices, Inventory Tracking
• Power - Output: 5mW
• Sensitivity: -100dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 30mA
• Current - Transmitting: 40mA
• Data Interface: Connector, 2 x 10 Header
• Antenna Connector: MMCX
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Board Size: 49 mm x 42 mm x 5 mm
• Output Power: 5 mW
• Antenna: External MMCX Connector
• Frequency Rf: 869.65MHz
• Transmit Power: 5mW
• Interface Type: Serial
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

AC4486 Specifications
4.6.12 W ite Static Bank #2 Byte
The Host issues this command to the transceiver to write Static Bank #2 Bytes. Static Bank #2 is a
bank of memory that holds many of the parameters that control the transceiver. Using the Read/Write
Static Bank #2 command allows these parameters to be changed dynamically. Because the memory
bank is static, when the transceiver is reset, these parameters will revert back to the settings stored in
EEPROM. Be careful not to change Static Bank addresses unless directed to do so by AeroComm.
Host Command:
Transceiver Response:
4.6.13 W ite Destination Address
The Host issues this command to the transceiver to change the Destination Address. This is a very
powerful command that provides the OEM Host with a means for ad-hoc networking. Only the three
Least Significant Bytes of the MAC Address are used for packet delivery.
Host Command:
Transceiver Response:
4.6.14 Read Destination Address
The Host issues this command to the transceiver to read the Destination Address. This is a very
powerful command that provides the OEM Host with a means for ad-hoc networking. Only the three
Least Significant Bytes of the MAC Address are used for packet delivery.
Host Command:
Transceiver Response:
01/21/05
Byte 1 = CCh
Byte 2 = 0Dh
Byte 3 = 00 – FFh corresponding to a valid Static Bank #2 address
Byte 4 = 00 – FFh corresponding to new value for address specified by Byte 3
Byte 1 = CCh
Byte 2 = 00 – FFh corresponding to a valid Static Bank #2 address
Byte 3 = 00 – FFh corresponding to new value for address specified by Byte 2
Byte 1 = CCh
Byte 2 = 10h
Bytes 3 – 5 = 00 – FFh corresponding the three LSB’s of the destination MAC Address
Byte 1 = CCh
Bytes 2 – 4= 00 – FFh corresponding the three LSB’s of the destination MAC Address
Byte 1 = CCh
Byte 2 = 11h
Byte 1 = CCh
Bytes 2 – 4= 00 – FFh corresponding the three LSB’s of the destination MAC Address
r
r
30