AC4486-5M Laird Technologies, AC4486-5M Datasheet - Page 37

TXRX 868MHZ 3V TTL 5MW RS232

AC4486-5M

Manufacturer Part Number
AC4486-5M
Description
TXRX 868MHZ 3V TTL 5MW RS232
Manufacturer
Laird Technologies
Series
AeroCommr
Datasheets

Specifications of AC4486-5M

Frequency
868MHz
Data Rate - Maximum
115.2kbps
Modulation Or Protocol
FSK
Applications
AMR, Gaming Devices, Inventory Tracking
Power - Output
5mW
Sensitivity
-100dBm
Voltage - Supply
3.3V
Current - Receiving
30mA
Current - Transmitting
40mA
Data Interface
Connector, 2 x 10 Header
Antenna Connector
MMCX
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Board Size
49 mm x 42 mm x 5 mm
Output Power
5 mW
Antenna
External MMCX Connector
Frequency Rf
869.65MHz
Transmit Power
5mW
Interface Type
Serial
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Memory Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AC4486-5M
Manufacturer:
Laird Technologies Wireless M2
Quantity:
135
AC4486 Specifications
4.6.27 EEPROM Byte Write
Upon receiving this command, a transceiver will write the data byte to the address specified but will not
echo it back to the Host until the EEPROM write cycle is complete. The write can take as long as
10ms to complete. Following the write cycle, a transceiver will transmit the data byte to the Host.
Multiple byte EEPROM writes are allowed up to a length of 128 bytes. An EEPROM boundary exists
between addresses 7Fh and 80h. No single EEPROM write command shall write to addresses on
both sides of that EEPROM boundary.
Host Command:
Transceiver Response:
4.6.28 Reset Command
The Host issues this command to perform a soft reset of the transceiver. Any transceiver settings
modified by CC Commands will be overwritten by values stored in the EEPROM.
Host Command:
Transceiver Response:
01/21/05
Byte 1 = CCh
Byte 2 = C1h
Byte 3 = Address
Byte 4 = Length (01 – 80h)
Byte 5…n = Data to store at Address
Byte 1 = CCh
Byte 2 = Address
Byte 3 = Length (01 – 80h)
Byte 4 = Last data byte written by this command
Byte 1 = CCh
Byte 2 = FFh
There is no response from the transceiver
37

Related parts for AC4486-5M