ATMEGA2560R231-CU Atmel, ATMEGA2560R231-CU Datasheet - Page 184

• Manufacturer Part Number: ATMEGA2560R231-CU
• Description: BUNDLE ATMEGA2560/RF231 PBGA
• Manufacturer: Atmel

Specifications of ATMEGA2560R231-CU

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee, 6LoWPAN, RF4CE, SP100, WirelessHART™, ISM
• Data Interface: PCB, Surface Mount
• Memory Size: 256kB Flash, 4kB EEPROM, 8kB RAM
• Antenna Connector: PCB, Surface Mount
• Package / Case: 100-CBGA and 32-QFN
• Processor Series: ATMEGA256x
• Core: AVR8
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 256 KB
• Data Ram Size: 8 KB
• Development Tools By Supplier: ATAVRRZ541, ATAVRRAVEN, ATAVRRZRAVEN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Power - Output: -
• Operating Temperature: -
• Applications: -
• Sensitivity: -
• Data Rate - Maximum: -
• Current - Transmitting: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Details

19.8
2549M–AVR–09/10
Asynchronous Operation of Timer/Counter2
Figure 19-10
Figure 19-10. Timer/Counter Timing Diagram, Setting of OCF2A, with Prescaler (f
Figure 19-11
Figure 19-11. Timer/Counter Timing Diagram, Clear Timer on Compare Match mode, with Pres-
When Timer/Counter2 operates asynchronously, some considerations must be taken.
•
Warning: When switching between asynchronous and synchronous clocking of
Timer/Counter2, the Timer Registers TCNT2, OCR2x, and TCCR2x might be corrupted. A
safe procedure for switching clock source is:
1. Disable the Timer/Counter2 interrupts by clearing OCIE2x and TOIE2.
2. Select clock source by setting AS2 as appropriate.
3. Write new values to TCNT2, OCR2x, and TCCR2x.
4. To switch to asynchronous operation: Wait for TCN2UB, OCR2xUB, and TCR2xUB.
5. Clear the Timer/Counter2 Interrupt Flags.
6. Enable interrupts, if needed.
TCNTn
TCNTn
(clk
(clk
OCRnx
(CTC)
OCRnx
OCFnx
OCFnx
clk
clk
clk
clk
I/O
I/O
I/O
I/O
Tn
Tn
/8)
/8)
shows the setting of OCF2A in all modes except CTC mode.
shows the setting of OCF2A and the clearing of TCNT2 in CTC mode.
caler (f
clk_I/O
OCRnx - 1
TOP - 1
/8)
ATmega640/1280/1281/2560/2561
TOP
OCRnx
OCRnx Value
TOP
BOTTOM
OCRnx + 1
BOTTOM + 1
OCRnx + 2
clk_I/O
/8)
184