XRT94L43IB-F Exar Corporation, XRT94L43IB-F Datasheet - Page 181

• Manufacturer Part Number: XRT94L43IB-F
• Description: IC MAPPER SONET/SDH OC12 516BGA
• Manufacturer: Exar Corporation

Specifications of XRT94L43IB-F

• Applications: Network Switches
• Interface: Bus
• Voltage - Supply: 2.5V, 3.3V
• Package / Case: 516-BBGA
• Mounting Type: Surface Mount
• Product: Mapper
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

XRT94L43
SONET/SDH OC-12 TO 12XDS3/E3 MAPPER
STS-3/STM-1 TELECOM BUS INTERFACE - TRANSMIT DIRECTION
AF24
P
IN
#
STS3TxA_C1J1_2
TxDS3FP_10
TxSTS1PL_10
TxSBFrame_2
S
IGNAL
N
AME
I/O
I/O
S
CMOS
T
TTL/
IGNAL
YPE
STS-3/STM-1 Transmit Telecom Bus C1/J1 Byte Phase Indicator
Input Signal (Channel 2); DS3/E3 Frame Generator Framing
Pulse Input/Output Pin - Channel 10:
The function of this pin depends upon whether or not theSTS-3/STM-
1 Telecom Bus Interface for Channel 2 has been enabled.
If STS-3/STM-1 Telecom Bus (Channel 2) has been enabled -
STS-3/STM-1 Transmit Telecom Bus C1/J1 Byte Phase Indicator
Input Signal (Channel 2):
This input pin should be pulsed "High" during both of the following
conditions.
1. Whenever the C1 byte is being input to the STS-3/STM-1 Transmit
Telecom Bus (TXA_D_2[7:0]) input pins.
2. Whenever the J1 byte is being input to the STS-3/STM-1 Transmit
Telecom Bus (TXA_D_2[7:0]) input pins.
If STS-3/STM-1 Telecom Bus (Channel 2) is disabled -
TxDS3FP_10 (Transmit DS3 Frame Pulse Input/Output - Channel
10):
If the STS-3/STM-1 Telecom Bus (Channel 2) is disabled and if the
DS3/E3 Framer block is enabled then this pin will function as either a
Transmit Framing Reference input pin or as a Transmit Framing Ref-
erence output pin.
If the Frame Generator (within the DS3/E3 Framer block) is con-
figured to operate in the Loop-Timing or in the Local-Timing/
Asynchronous Framing Mode:
This pin will function as a Framing Reference Output pin. The Frame
Generator block (associated with Channel 10) will pulse this output
pin "High" for one DS3/E3 bit-period, one period prior to the first bit of
a given DS3 or E3 frame being applied to the DS3/E3/
STS1_DATA_IN_10 input pin.
If the Frame Generator (within the DS3/E3 Framer block) is con-
figured to operate in the Local-Timing/TxDS3FP Mode:
This pin will function as a Framing Reference Input pin. In this mode,
the user is expected to pulse this input pin "High" for one DS3 or E3
bit-period, coincident with the first bit of a given DS3 or E3 frame,
being placed on the DS3/E3/STS1_DATA_IN_10 input pin. The
Frame Generator block (associated with Channel 10) will synchro-
nize its generation of DS3 or E3 frames to these framing pulses
applied to this input pin.
N
OTE
: This pin is inactive if the Frame Generator block, associated
175
with Channel 10 is by-passed.
D
ESCRIPTION
REV. 1.0.2