AT32UC3C164C-AUR Atmel, AT32UC3C164C-AUR Datasheet - Page 46

• Manufacturer Part Number: AT32UC3C164C-AUR
• Description: IC MCU AVR32 64K FLASH 100TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3C164C-AUR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, Ethernet, I²C, IrDA, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 81
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x12b, D/A 4x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

6. Supply and Startup Considerations
6.1
6.1.1
6.1.2
6.1.3
6.1.3.1
32117BS–AVR-03/11
Supply Considerations
Power Supplies
Voltage Regulators
Regulators Connection
5V Single Supply Mode
The AT32UC3C has several types of power supply pins:
•
•
•
•
•
•
•
•
•
See
For decoupling recommendations for the different power supplies, please refer to the schematic
checklist.
The AT32UC3C embeds two voltage regulators:
The AT32UC3C supports two power supply configurations.
In 5V single supply mode, the 1.8V internal regulator is connected to the 5V source (VDDIN_5
pin) and its output feeds VDDCORE.
The 3.3V regulator is connected to the 5V source (VDDIN_5 pin) and its output feeds the USB
pads. If the USB is not used, the 3.3V regulator can be disabled through the VREG33CTL field
of the VREGCTRL SCIF register.
• One 1.8V internal regulator that converts from VDDIN_5 to 1.8V. The regulator supplies the
• One 3.3V internal regulator that converts from VDDIN_5 to 3.3V. The regulator supplies the
• 5V single supply mode
• 3.3V single supply mode
VDDIO pins (VDDIO1, VDDIO2, VDDIO3): Power I/O lines. Two voltage ranges are available: 5V or
3.3V nominal. The VDDIO pins should be connected together.
VDDANA: Powers the Analog part of the device (Analog I/Os, ADC, ACs, DACs). 2 voltage ranges
available: 5V or 3.3V nominal.
VDDIN_5: Input voltage for the 1.8V and 3.3V regulators. Two Voltage ranges are available: 5V or
3.3V nominal.
VDDIN_33:
VDDCORE: Stabilization for the 1.8V voltage regulator, requires external capacitors.
GNDCORE: Ground pins for the voltage regulators and the core.
GNDANA: Ground pin for Analog part of the design
GNDPLL: Ground pin for the PLLs
GNDIO pins (GNDIO1, GNDIO2, GNDIO3): Ground pins for the I/O lines. The GNDIO pins should be
connected together.
output voltage on VDDCORE.
USB pads on VDDIN_33. If the USB is not used, the 3.3V regulator can be disabled through
the VREG33CTL field of the VREGCTRL SCIF register.
– USB I/O power supply
– if the device is 3.3V powered: Input voltage, voltage is 3.3V nominal.
– if the device is 5V powered: stabilization for the 3.3V voltage regulator, requires external
”Electrical Characteristics” on page 50
capacitors
for power consumption on the various supply pins.
AT32UC3C
46