CY3263-COLORLOCK Cypress Semiconductor Corp, CY3263-COLORLOCK Datasheet - Page 11

• Manufacturer Part Number: CY3263-COLORLOCK
• Description: KIT EVAL COLOR-LOCK
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-Color™r

Specifications of CY3263-COLORLOCK

• Main Purpose: Lighting, RGB LED Controller
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CY8CLEDxx
• Primary Attributes: EZ-Color™ LED Driver MCUs Generate Colors using Optical Feedback
• Secondary Attributes: View 1931 CIE Coordinates via LCD, Red, Green, and Blue 1W LEDs
• Core Chip: CY3263
• Kit Contents: CY3263-ColorLock Evaluation Board, Tools CD, USB Cable, Power Supply Adapter
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 428-2271

1.4.2
CY3263-ColorLock EZ-Color Evaluation Kit Guide, Doc. # 001-44081 Rev. *A
4. When drivers and valuators are added to a design, the Add Driver window opens
5. Click OK.
Program Parts with PSoC Express Projects
1. Connect the USB cable to the MiniProg and to the PC.
2. Connect the MiniProg to the programming header specified by the lab instructions.
3. Select Program → PSoC Programmer from PSoC Express. The following three actions are
Note: If the Actions column in the PSoC Programmer status box indicates “Firmware update
required at...”, the MiniProg's firmware is out of date. Before attempting to program the target EZ-
Color chip, go to Utilities → Upgrade Firmware to update the MiniProg's firmware.
Name the item and enter the properties required for the design.
Figure 1-6. Add Driver Window
automatically accomplished:
a. PSoC Programmer starts.
b. The executable firmware is loaded into PSoC Programmer.
c. The EZ-Color device to be programmed is specified in PSoC Programmer.
WARNING: Disconnect all power sources from the board.
occur if you program the board while leaving a wall adapter connected.
Damage to the board may
(Figure
Introduction
1-6).
11