S183E BANNER ENGINEERING, S183E Datasheet - Page 10

• Manufacturer Part Number: S183E
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of S183E

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 300mA
• Switch Terminals: Cable
• Sensor Housing: Barrel
• Sensor Input: Optical
• Sensing Range Max: 20m
• Sensing Mode: Opposed
• Brand/series: S18
• Current, Switching: 300 mA
• Humidity: 90% @ 50 °C (Non-Condensing)
• Ip Rating: IP69K
• Length, Cable: 6.5 ft.
• Material, Housing: PBT Polyester
• Material, Lens: Polycarbonate⁄Acrylic
• Output: SPST
• Primary Type: Photoelectric
• Range, Measurement: 66 mm
• Response Time: 16 ms (ON), 8 ms (OFF)
• Standards: CE Mark, CSA Certified, UL Listed
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: Cable
• Vibration: 10 to 60 Hz (Max.)
• Voltage, Supply: 250 VAC
• Lead Free Status / Rohs Status: RoHS Exempt Product

74
Compact Sensors
WORLD-BEAM
Supply Voltage
Supply Protection Circuitry
Output Configuration
Output Response Time
Delay at Power-up
Repeatability
Adjustments
Indicators
Construction
Connections
Operating Conditions
Application Note
Certifications
Hookup Diagrams
More information online at
®
QS18 Expert
WORLD-BEAM
WORLD-BEAM
10 to 30V dc (10% max. ripple) at less than 35 mA, exclusive of load; 10 to 24V dc @ greater than 55° C
Protected against reverse polarity and transient voltages
SPST solid-state NPN (current sinking) or PNP (current sourcing), depending on model. Configuration in TEACH
sequence for light operate (LO) or dark operate (DO).
Rating: 100 mA max.
OFF-state leakage current: less than 50 µA @ 30V dc
ON-state saturation voltage: less than 1.5V (2 m cable); 1.7V (9 m cable)
Protected against false pulse on power-up and continuous overload or short circuit of output
600 microseconds ON/OFF
Less than 1 second; outputs do not conduct during this time
75 microseconds
Push button and remote wire
• Thresholds: Push-button/remote-wire teachable
• Light/dark operate: Selectable by programming order (load output follows the first taught target condition)
• Push-button lockout (remote wire only)
2 LED indicators:
Polycarbonate/ABS housing and TPE push button, rated IEC IP67; NEMA 6
3 mm mounting hardware included
2 m or 9 m 4-wire PVC cable, or 4-pin 150 mm pigtail Pico-style QD (Q), or 4-pin 150 mm pigtail Euro-style QD (Q5), or
4-pin Integral Pico-style QD (Q7), or 4-pin Integral Euro-style QD (Q8). QD cables are ordered separately. See pages 378
and 380.
Temperature: -20° to +70° C
The first condition presented during TEACH mode becomes the OUTPUT ON condition.
NPN Models: DC09 (p. 478)
bannerengineering.com
Green: RUN mode, output short-circuit
Red: Output ON/marginal, TEACH mode
™
Series
®
QS18 Ultrasonic Specifications
®
QS18 Expert
See page 295.
Relative humidity: 90% @ 50° C (non-condensing)
PNP Models: DC10 (p. 478)
™
Specifications