S183E BANNER ENGINEERING, S183E Datasheet - Page 27

• Manufacturer Part Number: S183E
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of S183E

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 300mA
• Switch Terminals: Cable
• Sensor Housing: Barrel
• Sensor Input: Optical
• Sensing Range Max: 20m
• Sensing Mode: Opposed
• Brand/series: S18
• Current, Switching: 300 mA
• Humidity: 90% @ 50 °C (Non-Condensing)
• Ip Rating: IP69K
• Length, Cable: 6.5 ft.
• Material, Housing: PBT Polyester
• Material, Lens: Polycarbonate⁄Acrylic
• Output: SPST
• Primary Type: Photoelectric
• Range, Measurement: 66 mm
• Response Time: 16 ms (ON), 8 ms (OFF)
• Standards: CE Mark, CSA Certified, UL Listed
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: Cable
• Vibration: 10 to 60 Hz (Max.)
• Voltage, Supply: 250 VAC
• Lead Free Status / Rohs Status: RoHS Exempt Product

Repeatability
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
Hookup Diagrams
Q23 and QH23 Specifications (cont’d)
Opposed: 0.13 milliseconds;
Retroreflective and Diffuse: 0.25 milliseconds
FPY High-Speed Plastic Fiber Optic: 25 microseconds
Response time and repeatability specifications are independent of signal strength.
SENSITIVITY control (single-turn, o-ring sealed potentiometer)
Sensors except opposed mode emitters have two LEDs:
Emitters have green power “ON” indicator
Yellow and black ABS housing, with acrylic lenses, completely sealed. Stainless steel mounting bracket and M3
mounting hardware are supplied
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12, and 13; IEC IP67. Housing materials rated UL 94 V-0
PVC-jacketed 4-conductor 2 m or 9 m cables, or 4-pin Pico-style 50 mm threaded quick-disconnect (QD) fitting are
avail able. Mating QD cables are ordered separately. See page 378.
Temperature: -20° to +55° C
To avoid damage to the sensor caused by static discharge (ESD), use the plastic screwdriver supplied with each
sensor (included in the hardware packet) to adjust the SENSITIVITY control. Otherwise, use a screwdriver with an
insulated handle.
Emitters: DC03 (p. 476)
Green ON steady: dc power ON
Green flashing: output overload
Yellow ON steady: Light Operate (LO), output is energized
Yellow flashing: marginal excess gain (1 - 1.5x), LO output is energized
Q23 and QH23 Specifications
NPN Models: DC07 (p. 477)
Relative humidity: 90% at 50° C (non-condensing)
More information online at
PNP Models: DC08 (p. 477)
bannerengineering.com
(cont’d)
Compact Sensors
Q23 Series
91