ATA6603-EK Atmel, ATA6603-EK Datasheet - Page 26

• Manufacturer Part Number: ATA6603-EK
• Description: MCU, MPU & DSP Development Tools Demoboard LIN-MCM
• Manufacturer: Atmel

Specifications of ATA6603-EK

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4. Microcontroller Block
4.1
26
Features
ATA6602/ATA6603
•
•
•
•
•
•
•
•
•
High Performance, Low Power AVR 8-bit Microcontroller
Advanced RISC Architecture
Non-volatile Program and Data Memories
Peripheral Features
Special Microcontroller Features
I/O
Operating Voltage
Speed Grade
Low Power Consumption
– 131 Powerful Instructions - Most Single Clock Cycle Execution
– 32
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
– 8/16 Kbytes of In-System Self-programmable Flash (ATA6602/ATA6603)
– Optional Boot Code Section with Independent Lock Bits
– 512 Bytes EEPROM
– 1 Kbyte Internal SRAM
– Programming Lock for Software Security
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel 10-bit ADC
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte-oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby
– 23 Programmable I/O Lines
– 2.7V to 5.5V
– 0 to 8 MHz at 2.7V to 5.5V, 0 to 16 MHz at 4.5V to 5.5V
– Active Mode:
– Power-down Mode:
Endurance: 75,000 Write/Erase Cycles
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
Endurance: 100,000 Write/Erase Cycles
• 4 MHz, 3.0V: 1.8 mA
• 5 µA at 3.0V
8 General Purpose Working Register
4921E–AUTO–09/09