BSS84PW Infineon Technologies, BSS84PW Datasheet - Page 8

• Manufacturer Part Number: BSS84PW
• Description: MOSFET P-CH 60V 150MA SOT-323
• Manufacturer: Infineon Technologies
• Series: SIPMOS®r

Specifications of BSS84PW

• Fet Type: MOSFET P-Channel, Metal Oxide
• Fet Feature: Logic Level Gate
• Rds On (max) @ Id, Vgs: 8 Ohm @ 150mA, 10V
• Drain To Source Voltage (vdss): 60V
• Current - Continuous Drain (id) @ 25° C: 150mA
• Vgs(th) (max) @ Id: 2V @ 20µA
• Gate Charge (qg) @ Vgs: 1.5nC @ 10V
• Input Capacitance (ciss) @ Vds: 19.1pF @ 25V
• Power - Max: 300mW
• Mounting Type: Surface Mount
• Package / Case: SOT-323
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: BSS84PW; BSS84PWINTR; BSS84PWXT

BSS84PW
Published by
Infineon Technologies AG,
Bereichs Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 1999
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device
or system Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.
2006-12-05
Rev 1.3
Page 8