H7BR-CWV-AC100-240 Omron, H7BR-CWV-AC100-240 Datasheet - Page 13

• Manufacturer Part Number: H7BR-CWV-AC100-240
• Description: COUNTER DIGITAL LCD 100-240V NPN
• Manufacturer: Omron
• Series: H7BRr
• Type: Digital Counterr

Specifications of H7BR-CWV-AC100-240

• Count Rate: *
• Number Of Digits/alpha: 6
• Input Type: *
• Output Type: *
• Voltage - Supply: 100 V ~ 240 VAC
• Display Type: *
• Equipment Type: Digital Counter
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H7BRCWVAC100240

H7BR
3. Input a count signal corresponding to the conversion count value
•
4. Perform prescale value teaching per count.
Press the TEACH Key. (Prescale value 0.2 = 10 cm/50)
•
•
•
through the external sensor.
The display on the right side indicates that an input of 50 counts
has been input from the external sensor with the controlled
object moved 10 cm.
If the conversion count value input at step 3 is a negative value,
the prescale value will be calculated using the absolute value of
the conversion count value.
The fraction is rounded off for prescale calculations. (It is
rounded upward when displaying negative values.)
While the TEACH Key is pressed, the teaching prescale value
(i.e., 0.2) is displayed.
Set Value 1 Teaching
1.
2.
3.
•
Set Value 2 Teaching (Two-stage Models Only)
•
The teaching set value is displayed while the TEACH Key is
pressed.
Perform the same procedure as Set Value 1 Teaching above.
Press the DISPLAY Key to return to run mode from teaching
mode.
Press the MODE Key to perform the teaching of set value 1,
provided that the H7BR is a two-stage model.
Input an appropriate count signal from the external sensor.
Register the count value 250 as the set value, for example.
Press the TEACH Key.
H7BR
13