DE1E3KX472MA5BA01 Murata Electronics, DE1E3KX472MA5BA01 Datasheet - Page 39

no-image

DE1E3KX472MA5BA01

Manufacturer Part Number
DE1E3KX472MA5BA01
Description
Cap Ceramic 0.0047uF 250VAC E 20% 15 X 8mm RDL 10mm Bulk
Manufacturer
Murata Electronics
Type
Radialr
Datasheet

Specifications of DE1E3KX472MA5BA01

Package/case
15(Max) X 8(Max)
Lead Pitch For Radial
10 mm
Capacitance Value
0.0047 uF
Dielectric
E
Tolerance
20 %
Voltage
250 Vac
Product Depth
8(Max) mm
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
No.
Item
Appearance
Capacitance
Change
Soldering Effect
12
(Non-Preheat)
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
Soldering Effect
13
(On-Preheat)
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
D.F.
I.R.
Temperature
14
Cycle
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
D.F.
Humidity (Under
15
Steady State)
I.R.
*
1
"room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
DEH Series Specifications and Test Methods
Specifications
No marked defect
The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
Within ±10%
3.5±0.5 sec.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*
Per item 4.
Measurement order:
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
Capacitance
No marked defect
First the capacitor should be
stored at 120+0/-5°C for
Within ±10%
60+0/-5 sec.
Then, as in figure, the lead wires
should be immersed in solder of
260+0/-5°C up to 1.5 to 2.0mm
from the root of terminal for
7.5+0/-1 sec.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
Per item 4.
at room condition*
Post-treatment:
Capacitor should be stored for 24±2 hrs. at room condition*
Measurement order:
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
Capacitance
No marked defect
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Within ±10%
0.4% max.
1000MΩ min.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at room condition*
Post-treatment:
Per item 4.
Capacitor should be stored for 24±2 hrs. at room condition*
Measurement order:
I.R.
D.F. -> Temperature cycle test -> Post-treatment ->
Capacitance
(Char. R [DC250V])
No marked defect
Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Within ±10%
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
0.4% max.
at room condition*
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition*
Measurement order:
1000MΩ min.
I.R. -> Pre-treatment -> Capacitance
Post-treatment -> Capacitance
(Char. R [DC250V])
Test Method
1
for 24±2 hrs. before initial measurements.
Dielectric strength (Char. R [DC250V])
Capacitor
Thermal
Screen
1
for 24±2 hrs. before initial measurements.
Dielectric strength (Char. R [DC250V])
Step
Temperature (°C)
Time (min)
1
-25±3
30
2
Room Temp.
3
3
125±3
30
4
Room Temp.
3
Cycle time: 5 cycle
1
for 24±2 hrs. before initial measurements.
Dielectric strength -> Pre-treatment -> Capacitance
D.F.
I.R.
Dielectric strength
for 24±2 hrs. before initial measurements.
1
D.F. -> Humidity test ->
D.F.
I.R.
Continued on the following page.
C85E.pdf
08.10.29
1
.
1.5
to 2.0mm
Molten
Solder
1
.
7
1
.
1
.
37

Related parts for DE1E3KX472MA5BA01