PIC32MX775F256H-80V/PT Microchip Technology, PIC32MX775F256H-80V/PT Datasheet - Page 117

• Manufacturer Part Number: PIC32MX775F256H-80V/PT
• Description: 256 KB Flash, 64 KB RAM, USB-OTG, Dual CAN, Ethernet, 80 MHz, 10-Bit ADC, DMA 64
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX775F256H-80V/PT

• Processor Series: PIC32MX7xx
• Core: MIPS
• Data Bus Width: 32 bit
• Program Memory Type: Flash
• Program Memory Size: 256 KB
• Data Ram Size: 64 KB
• Interface Type: USB, I2C, UART, RS-232, RS-485, SPI
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: TQFP-100
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current (max): 10 mA
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: CAN, Ethernet, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Eeprom Size: -
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Lead Free Status / Rohs Status: Details

5.0
© 2009-2011 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
FLASH PROGRAM MEMORY
of the PIC32MX5XX/6XX/7XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 5. “Flash
Program Memory” (DS61121) in the
“PIC32 Family Reference Manual”, which
is available from the Microchip web site
(www.microchip.com/PIC32).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
in
PIC32MX5XX/6XX/7XX devices contain an internal
Flash program memory for executing user code. There
are three methods by which the user can program this
memory:
1.
2.
3.
RTSP is performed by software executing from either
Flash or RAM memory. Information about RTSP
techniques is available in Section 5. “Flash Program
Memory” (DS61121) in the “PIC32 Family Reference
Manual”.
EJTAG is performed using the EJTAG port of the
device and an EJTAG capable programmer.
ICSP is performed using a serial data connection to the
device and allows much faster programming times than
RTSP.
The EJTAG and ICSP methods are described in the
“PIC32 Flash Programming Specification” (DS61145),
which can be downloaded from the Microchip web site.
PIC32MX5XX/6XX/7XX
Run-Time Self-Programming (RTSP)
EJTAG Programming
In-Circuit Serial Programming™ (ICSP™)
DS61156G-page 117