PIC32MX775F256H-80V/PT Microchip Technology, PIC32MX775F256H-80V/PT Datasheet - Page 248

• Manufacturer Part Number: PIC32MX775F256H-80V/PT
• Description: 256 KB Flash, 64 KB RAM, USB-OTG, Dual CAN, Ethernet, 80 MHz, 10-Bit ADC, DMA 64
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX775F256H-80V/PT

• Processor Series: PIC32MX7xx
• Core: MIPS
• Data Bus Width: 32 bit
• Program Memory Type: Flash
• Program Memory Size: 256 KB
• Data Ram Size: 64 KB
• Interface Type: USB, I2C, UART, RS-232, RS-485, SPI
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: TQFP-100
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current (max): 10 mA
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: CAN, Ethernet, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Eeprom Size: -
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Lead Free Status / Rohs Status: Details

PIC32MX5XX/6XX/7XX
TABLE B-4:
DS61156G-page 248
7.0 “Interrupt Controller”
8.0 “Oscillator Configuration”
16.0 “Output Compare”
24.0 “Ethernet Controller”
26.0 “Comparator Voltage Reference
(CV
28.0 “Special Features”
31.0 “Electrical Characteristics”
Appendix A: “Migrating from
PIC32MX3XX/4XX to PIC32MX5XX/
6XX/7XX Devices”
REF
)”
Section Name
SECTION UPDATES (CONTINUED)
• Updated the following Interrupt Sources in
Updated
Updated
Added a note on using the Ethernet controller pins (see note above
Table
Updated the note in
Updated the bit description for bit 10 in
Added notes 1 and 2 to
Updated the Absolute Maximum Ratings:
• Voltage on any 5V tolerant pin with respect to V
• Voltage on V
Updated the maximum value of DC16 as 2.1 in
Updated the Typical values for the following parameters: DC20b, DC20c,
DC21c, DC22c and DC23c (see
Updated
• Removed the following DC Characteristics: Programming temperature
• Updated the Minimum value for the Parameter number D131 as 2.3
• Removed the Conditions for the following Parameter numbers: D130,
• Updated the condition for the parameter number D130a and D132a
Updated the Minimum, Typical and Maximum values for parameter D305
in
Added note 2 to
Updated the Minimum and Maximum values for parameter F20b (see
Table
Updated the following figures:
•
•
•
•
Removed the A.3 Pin Assignments sub-section.
- Changed IC2AM – I2C4 Master Event to: IC4M – I2C4 Master Event
- Changed IC3AM – I2C5 Master Event to: IC5M – I2C4 Master Event
- Changed U1E – UART1A Error to: U1E – UART1 Error
- Changed U4E – UART1B Error to: U4E – UART4 Error
- Changed U1RX – UART1A Receiver to: U1RX – UART1 Receiver
- Changed U4RX – UART1B Receiver to: U4RX – UART4 Receiver
- Changed U1TX – UART1A Transmitter to: U1TX – UART1 Transmitter
- Changed U4TX – UART1B Transmitter to: U4TX – UART4 Transmitter
- Changed U6E – UART2B Error to: U6E – UART6 Error
- Changed U6RX – UART2B Receiver to: U6RX – UART6 Receiver
- Changed U6TX – UART2B Transmitter to: U6TX – UART6 Transmitter
- Changed U5E – UART3B Error to: U5E – UART5 Error
- Changed U5RX – UART3B Receiver to: U5RX – UART5 Receiver
- Changed U5TX – UART3B Transmitter to: U5TX – UART5 Transmitter
0.3V to +3.6V was updated
0°C ≤ TA ≤ +70°C (25°C recommended)
D131, D132, D135, D136 and D137
Figure 31-4
Figure 31-9
Figure 31-19
Figure 31-20
Table 31-13
24-3)
31-19)
Figure 8-1
Figure 16-1
Table
BUS
31-11:
Table 31-18
with respect to V
Figure 26-1
Register 28-4
Update Description
Table
SS
31-5)
© 2009-2011 Microchip Technology Inc.
- 0.3V to +5.5V was added
Register 28-2
Table
Table 31-4
SS
7-1:
when V
DD
< 2.3V -