PCA9506DGG,518 NXP Semiconductors, PCA9506DGG,518 Datasheet - Page 28

• Manufacturer Part Number: PCA9506DGG,518
• Description: IC I/O EXPANDER I2C 40B 56TSSOP
• Manufacturer: NXP Semiconductors

Specifications of PCA9506DGG,518

• Package / Case: 56-TSSOP
• Interface: I²C
• Number Of I /o: 40
• Interrupt Output: Yes
• Frequency - Clock: 400kHz
• Voltage - Supply: 2.3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Includes: POR
• Logic Family: PCA9506
• Number Of Lines (input / Output): 40.0 / 40.0
• Operating Supply Voltage: 2.3 V to 5.5 V
• Power Dissipation: 500 mW
• Operating Temperature Range: - 40 C to + 85 C
• Input Voltage: 5.5 V
• Logic Type: I/O Expander
• Maximum Clock Frequency: 400 KHz
• Mounting Style: SMD/SMT
• Number Of Input Lines: 40.0
• Number Of Output Lines: 40.0
• Output Current: 50 mA
• Output Voltage: 5.5 V
• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Package Type: TSSOP
• Rad Hardened: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935280798518; PCA9506DGG-T; PCA9506DGG-T

Philips Semiconductors
17. Abbreviations
18. Revision history
Table 14:
9397 750 14939
Product data sheet
Document ID
PCA9506_1
Revision history
Release date
20060214
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Table 13:
Acronym
CDM
DUT
ESD
HBM
IC
I
LED
MM
PLC
POR
PWM
RAID
2
C-bus
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the
maximum temperature (with respect to time) and body size of the package, there is a risk that internal or
external package cracks may occur due to vaporization of the moisture in them (the so called popcorn
effect). For details, refer to the Drypack information in the Data Handbook IC26; Integrated Circuit
Packages; Section: Packing Methods .
These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no
account be processed through more than one soldering cycle or subjected to infrared reflow soldering with
peak temperature exceeding 217 C
body peak temperature must be kept as low as possible.
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the
solder cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink
on the top side, the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave
direction. The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger
than 0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered
pre-mounted on flex foil. However, the image sensor package can be mounted by the client on a flex foil by
using a hot bar soldering process. The appropriate soldering profile can be provided on request.
Hot bar soldering or manual soldering is suitable for PMFP packages.
Abbreviations
Data sheet status
Product data sheet
Description
Charged Device Model
Device Under Test
ElectroStatic Discharge
Human Body Model
Integrated Circuit
Inter IC bus
Light Emitting Diode
Machine Model
Programmable Logic Controller
Power-On Reset
Pulse Width Modulation
Redundant Array of Independent Disks
Rev. 01 — 14 February 2006
10 C measured in the atmosphere of the reflow oven. The package
Change notice
-
40-bit I
2
C-bus I/O port with RESET, OE, and INT
Doc. number
9397 750 14939
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Supersedes
-
PCA9506
28 of 30