TE28F800B3TA110 Intel, TE28F800B3TA110 Datasheet - Page 33

• Manufacturer Part Number: TE28F800B3TA110
• Manufacturer: Intel

Specifications of TE28F800B3TA110

• Cell Type: NOR
• Density: 8Mb
• Access Time (max): 110ns
• Interface Type: Parallel
• Boot Type: Top
• Address Bus: 19b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 16b
• Number Of Words: 512K
• Supply Current: 18mA
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / Rohs Status: Not Compliant

6.0
6.1
Datasheet
Warning:
Table 9. Absolute Maximum Ratings
Maximum Ratings and Operating Conditions
Absolute Maximum Ratings
Stressing the device beyond the “Absolute Maximum Ratings” can cause permanent damage.
These ratings are stress ratings only. Intel recommends that you do not operate the device beyond
the “Operating Conditions” as extended exposure beyond the “Operating Conditions” can affect
device reliability.
NOTICE: Specifications are subject to change without notice. Verify with your local Intel Sales office that you have the latest
datasheet before finalizing a design
Extended Operating Temperature
Storage Temperature
Voltage On Any Pin (except V
V
V
Output Short Circuit Current
NOTES:
1. Minimum DC voltage is –0.5 V on input/output pins. During transitions, this level may
2. Maximum DC voltage on V
3. V
4. Output shorted for no more than one second. No more than one output shorted at a time.
PP
CC
During Read
During Block Erase and Program
Temperature under Bias
undershoot to –2.0 V for periods <20 ns. Maximum DC voltage on input/output pins is V
+0.5 V which, during transitions, may overshoot to V
be done for a maximum of 1000 cycles on the main blocks and 2500 cycles on the parameter
blocks during program/erase. V
Voltage (for Block Erase and Program) with Respect to GND
and V
PP
Program voltage is normally 1.65 V to 3.6 V. Connection to a 11.4 V to 12.6 V supply can
CCQ
Supply Voltage with Respect to GND
Parameter
CC
PP
.
and V
may overshoot to +14.0 V for periods <20 ns.
PP
may be connected to 12 V for a total of 80 hours maximum.
PP
) with Respect to GND
28F008/800B3, 28F016/160B3, 28F320B3, 28F640B3
CC
+2.0 V for periods <20 ns.
–65 °C to +125 °C
Maximum Rating
–0.5 V to +13.5 V
–40 °C to +85 °C
–40 °C to +85 °C
–40 °C to +85 °C
–0.5 V to +3.7 V
–0.2 V to +3.6 V
100 mA
CC
Notes
1,2,3
1
4
33